Maintenance (2nd shift)

Job Responsibilities:

•  Install, troubleshoot and/or repair any of a variety of electrical equipment (i.e., motors, controllers, etc.), hydraulic and mechanical devices per all OSHA requirements.
• Interpret blueprints or other written specifications for electrical, hydraulic, mechanical and pneumatic applications.
• Install and/or repair all types of plumbing (i.e., water, gas, steamline, hydraulic, etc.).
• Use safe practices in repairing, checking equipment using safety tagout-lockout procedure.
• Comply with all safety and housekeeping standards — Job Safety Analysis (JSA), Equipment Safety Analysis (ESA) and Area Safety Analysis (ASA).
• Communicate to coworkers and supervisors - developments, needs, etc. as they occur.
• Clean and lubricate equipment per maintenance schedule.
• Operate lathes, drills, presses, grinders and/or other machine tools to fabricate, modify, and/or repair machinery and/or mechanical parts/pieces needed.
• Ensure that job is run in environmental compliance after instructions from supervisor/environmental group.
• Perform routine housekeeping in work area(s) as necessary.
• Perform Lift Truck Mechanic duties, which requires:
• Documentation of preventative maintenance and expenditure programs
• Clean, lubricate and service motorized equipment per established schedule
• May require off-site work assignments at various American Trim facilities and/or may require occasional trips to suppliers for parts pick up.
• And other duties as assigned.

Education, Skills and Experience:

•  High school graduate or equivalent preferred.
• Journeyman or equivalent (minimum 10 years experience)
• Should have additional training - electrical apprentice or J.V.S.
• Blueprint reading ability for electrical, hydraulic, mechanical and pneumatic systems as well as engineering drawings (i.e. facility layout).
• Ability to use a variety of precision measuring instruments such as tape measure, micrometers, calipers, volt meter, amp probe.  Oscilloscope would be a plus.
• Oral and written communication skills.
• Mechanical ability to use tools of the trade, e.g. drill presses, lathes, grinders, etc.
• Welding capability - stick/tig.
• Lift truck skills - requires successful completion of lift truck training class/examination.
• H/VAC knowledge and experience

 Work Environment and Physical Demands:

• Work overtime as needed 
• Work at heights of 10 to 50 feet.
• Must supply own hand tools.
• Dirty/oily working environments.
• Must be able to lift up to 50 lbs. of a non-repetitive nature
• Must practice safety lockout/tagout procedure when working on equipment.
• Sometimes required to work alone - other times work very close with others.
• Able to cope with stringent deadlines for equipment needed back in service.
• Ability to work while wearing a respirator.  (Physical exam required.)
• Good eye/hand coordination, dexterity and adroitness.
• Requires standing, walking and/or moving about for periods of time in excess of one (1) hour
• Perform position requirements while wearing eye, ear, foot and/or other protective devices as required