Turbomachinery Repair Engineer

Overview & Responsibilities

Position Overview:

The successful candidate will set methods and criteria for execution of customer repair work for various types of rotating equipment (Steam Turbines, Centrifugal Compressors, Axial Compressors and other associated equipment).

Repair work will include overhauls; general maintenance upgrades and rerates for OEM and non-OEM equipment.

Purpose of the Job:

The Shop Engineer will engineer repair solutions and ensure the technical integrity of all work performed in the Repair Shop, while following Elliott and the industry standards. This position performs as a technical liaison for the repair shop team, field service and field sales personnel in performance of customer repair projects, shop modernization projects and general engineering and drafting in support of same. The primary objective is to ensure that good and sufficient technical oversight, where required, is applied to mechanical repair and modernization work performed within the Houston Service Center.

Background and Experience:

• Bachelor of Science Engineering (Mechanical, Aerospace), Bachelor of Science Engineering Technology, equivalent four-year degree.
• Min. 7-8 years of total experience with (but at least 5 years working with rotors, compressor and turbine repairs, inspections and overhaul) Rotary equipment such as Steam Turbines and Centrifugal Compressors.
• 2 years' experience in shop engineering or related experience including but not limited to fabrication, machining, & creation of industrial drawings.
• Background with repair methods such as Welding, Coating, Assembly and Dis-assembly of all levels and complexity for numerous designs/ equipment (blades, impellers, rotors, casings, full units).
• Basic exposition with metallurgy, material selection, heat treatments.
  
  
  

Specific Job Responsibilities:

• Ability to work overtime as needed
• Recommend Safe work practices as per policy, across the plant.
• Meet & exceed annual objectives.
• Provide technical assistance to shop floor regarding the tooling and machining practices of a particular part.
• Support the development and implementation of continuous improvement activities of operations including, but not limited to, establishing best practices, standard work instructions, safety culture and habits, and good housekeeping techniques.
• Dealing with non-conformities in a systematic way established in the QMS. Review and disposition product non-conformances.
• Systematic archiving of all engineering Job related records in timely manner for better traceability and retrieval.
• Tooling and fixture design and developing.
• Ensuring that the Quality Assurance Plans are strictly followed without any deviations while providing engineering support/ repair recommendations.
• Set methods and criteria for execution of repair work in the shop in conjunction with the Lead Engineer.
• Create Work Packages detailing Process specifications and Material specifications and other technical details required for execution of the project.
• Ensure the technical integrity of all recommendation of work performed in the Repair Shop and ensure value addition in order to improve current methods/ processes.
• Prepare the Repair Proposals based on the contract reviews and feasibility study.
• Compile findings and technical data in order to prepare Customer Reports (repair recommendations).
• Assist the shop floor during the repair execution.
• Support the Sales Engineers in quotation phase.
• Responsible for reverse engineering of non-complex non-Elliot product to achieve the successful completion of component repairs and delivery.
• Execute service engineering assignments requiring application of standard techniques, procedures, CAD and criteria which may involve independent action and decision.
• Collaborates with other departments to insure prompt and effective problem-solving of reported service shop troubles for assigned product line.
• Performs liaison functions with other engineering departments on the specification, manufacturing, assembly, material quality, testing, repair, performance and operation, for assigned product(s). Includes consulting with field service, service parts, and service repair on field trouble jobs, defective parts, rebuilds, rework, etc., and to rerate group on new parts orders, engineering studies and design changes.
• Prepare and approve layout and detail drawings relating to shop problems and service order requests.
• Prepares and reviews assigned writeups for technical manuals, special process specifications and work instructions.
• Review customer specifications as required and provide comments and exceptions to quality, inspection, and testing related items.
• Assist in customer witness inspections and tests as necessary.
• Apply engineering principles in the development of repair recommendations for turbomachinery
• Support reverse engineering team for complex non-Elliott product to achieve the successful completion of component repairs.
• Reviews assigned work scopes for the repair of turbomachinery while ensuring repair recommendation/ PO/ repair work scope are in line.
  
  
  

Specific Knowledge:

• Familiarity with all the most common NDT methods (PT, MT, UT, Zyglo, hardness test, PMI). It does not require to be certified/ qualified to perform these inspections (knowledge to be used for engineering purposes only).
• Strong knowledge and ability of using conventional metrology tools/ measurement tools.
• Strongly familiar with 3D metrology fundamentals and coordinate system.
• Familiarity with relevant ISO, ASME, and API codes and regulations.
• Advanced knowledge of standard drawing symbols, tolerances (GD&T).
• Advance skills with 3D modeling and detailing technical drawings (CREO is strongly desired, but Solidworks, Invertor, and similar will be considered).
• Basic AutoCAD and FEA abilities/ knowledge.
• Understanding of the criticalities involved in Turbomachinery repair processes.
• Understanding of Cost Optimization (cost vs benefit ratio) during repair recommendation process.
• Strong understanding of engineering practices.
• Fabrication & machining methods.
• Repair methods such as Welding, Coating, Assembly and Dis-assembly for all levels and complexity of numerous designs/ equipment (blades, impellers, rotors, casings, full units).
• Basic knowledge of metallurgy, material selection, heat treatments.
  
  
  

Skills:

• Good understanding and demonstrable exposure to Environment, Health and Safety practices is essential.
• Quick learner on Continuous improvement methods & techniques adopted at Elliott Group
• Active enthusiasm for Quality and Excellence.
• Strong analytical and mathematical skills.
• Ability to make and explain technical decisions.
• Ability to lead teams in problem solving during repairs and overhauls.
• Ability to learn quickly and adapt to a dynamic work environment.
• Ability to read/ interpretate technical drawings (metric and standard, first and third angle projection).
• Ability to work on his/her daily tasks, workloads, and requests, without supervision, being able to manage the work time needed and priorities by him/herself in a pace to accomplish the goals, deadlines and expectations, while delivering high quality engineering data/ information.
• Developed time management skills, with an ability to balance demand among various projects.
• Excellent computer skills regarding Word, Excel, and Power Point and able to operate with Elliott Business Systems.
• Demonstrated leadership ability to function as a lead Project Engineer in peak seasons.
• Demonstrated leadership ability to manage & direct rework/restoration requirements.
• Demonstrated ability provide quality customer service and support.
• Possesses good work habits, promptness, and dependability.
• Exhibits desire for continuous education and training effort.
• Self-directed worker, with good work ethic.
• Disciplined, able to follow directions and procedures.
• Professional and business-like behavior.
• Above average communications skills, verbal, and written with internal and external customers through emails, calls or in-person meetings.
• Ability to understanding of how designs effect manufacturing.
  
  
  

Differential

• Any turbomachinery Field Service Experience will be considered.
• Basic knowledge of 3D metrology (CMMs, CMM Arms, laser tracker, 3D scanner), will be considered.
• Familiarity with LBS and ASB process and methods will be considered.
• Vibration analysis knowledge/ familiarity will be considered.
  
  
  

Travel

• Travel requirements should be minimal, travel on the weekend may be required.
• Travel to customer site or others Elliott Service Centers as needed (unlikely, but possible).
  
  
  

Equal Employment Opportunity

Ebara Elliott Energy is an equal employment opportunity/affirmative action employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, marital status, genetic information, disability, veteran status, or any other characteristic protected by the federal, state or local laws of the United States. Applicants and employees are protected under U.S. federal law from discrimination. To learn more, click here.

Pay Transparency Nondiscrimination Provision

Ebara Elliott Energy follows Executive Order 11246, including the Pay Transparency Nondiscrimination Provision. To learn more, click here.

To learn more about our Job Applicant Privacy Notice, please click here.

No agency submissions please. NOTE: Resumes submitted to any Ebara Elliott Energy employee without a current, signed and valid contract in place with the Ebara Elliott Energy recruiting team will become the property of Ebara Elliott Energy and no search fees will be paid.