Plasma Operator

Flight Power Repair Group, LLC. is a privately held corporation headquartered in Doral, Florida specializing in providing MRO solutions for the aerospace and industrial markets. We specialize in the repair and overhaul of commercial jet engine components for CFMI CFM56-ALL Series, GE CF6-80C, CF34-ALL Series, Rolls Royce RB211 and Pratt & Whitney PW4000. We also offer repair and overhaul services for industrial turbine components on the Pratt & Whitney GG4/FT4, and GG8/FT8 aero-derivative gas turbines. In addition, Flight Power Repair Group provides a wide range of specialized services for engines, aircraft and landing gear applications which include; Vacuum Heat Treat, Solution and Precipitation Heat Treat, Stress Relief, Shotpeening, Plasma Spray, Cleaning, Ultrasonic Inspection, FPI & FMPI, Welding, Machining, protective coating applications.

SUMMARY: Responsible for preparing, masking, and applying metal spray coatings as specified by work orders, blueprints, sketches or charts in accordance with the current technical data provided in the manufacturers’ Instructions for Continued Airworthiness, Service Bulletins, service letters, Airworthiness Directives, government and industry standard practices, and other data acceptable to or approved by the Aviation Authority as required.

Reports to: Area Lead Man (dotted line to Production Manager)

DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

General

• Inspect part for condition prior to starting work
• Verify Part Number and Serial number (if applicable)
• Review for proper stamp-offs prior to commencement of work.
• Read and interpret process specifications in traveler.
• Clean and prepare part(s) for masking. Remove solvents or debris
• Mask as required using tape or hard masking as required.
• Surface preparation using aluminum oxide grit blast as per OEM instructions
• Metal spray using robotic Fanuc system.
• Move between production assignments that utilize multiple skills endorsements as needed to support production requirements.
• Responsible for observing all applicable safety requirements and observe and follow all safety procedures reporting immediately any unsafe practices/conditions.
• Responsible to be thoroughly familiar with all tools and equipment, including inspection aids, used within their assigned area of responsibility.
• Properly record the work performed on the appropriate maintenance record, router.
• Scan in and out of operation as required
• Perform visual inspections and make necessary adjustment to conform to job specifications
• Daily inspection, Cleaning and Preventative maintenance of all department equipment
• Pre-measure and post-measure parts with required tooling and gauges and record in records, router.
• Records information accurately on each component worked
• Perform required preventive maintenance on equipment as required and record accurately
• Responsible for daily housekeeping.

QUALIFICIATIONS:

To perform this job successfully, an individual must be able to meet the requirements and to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.

Education/Experience:

High school diploma or general education degree (GED); or two to three years related experience and/or training; or equivalent combination of education and experience.

Requirements:

• FAA Drug and Alcohol Screening
• Measuring Tools practical hand on test evaluation
• Previous experience using Fanuc or similar system.

· Must demonstrate mechanical aptitude

• Exhibit a strong work ethic that includes a good attendance record.
• Ability to work a flexible work schedule to include weekends, and overtime
• Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire

Computer Skills:

To perform this job successfully, an individual should have basic computer skills

Certificates and Licenses:

• None required

Supervisory Responsibilities:

This job has no supervisory responsibilities.

WORK ENVIRONMENT:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

• While performing the duties of this Job, the employee is regularly exposed to work near moving mechanical parts; fumes or airborne particles and toxic or caustic chemicals.
• The noise level in the work environment is usually loud within OSHA levels with hearing protection required.

Note: Nothing in this job specification restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Critical features of this job are described under various headings above. They may be subject to change at any time due to reasonable accommodation or other reasons. The above statements are strictly intended to describe the general nature and level of the work being performed. They are not intended to be construed as a complete list of all responsibilities, duties, and skills required of employees in this position.

Job Type: Full-time

Benefits:

• Dental insurance
• Health insurance
• Paid time off
• Vision insurance

Schedule:

• 8 hour shift
• Day shift

Language:

• English (Preferred)

Work Location: In person