Demo

Machining Tech V, Screw Machine - 2nd Shift

Howmet
Fullerton, CA Full Time
POSTED ON 1/20/2025
AVAILABLE BEFORE 3/20/2025
Responsibilities

Howmet Fastening Systems (HFS) is seeking a Machining Tech V, Screw Machine at our aerospace manufacturing facility in Fullerton, CA.

This position sets up and operates multiple spindle automatic screw machines. Incumbent will have control to make minor adjustments to the process or machine after tasks are assigned.

Essential Duties and Responsibilities

  • Independently makes complete set up of automatic screw machines.
  • Selects, mounts, and adjusts cutting tools; regulates time cycles; sets machine speeds, feeds and stops.
  • Selects and positions gears and cams as called out on screw machine layout.
  • Works from orders, screw machine part prints and screw machine layouts.
  • Operates machines to perform turning, drilling, reaming, facing, tapping, threading, forming and other operations within the capacity of the machine.
  • Sets up machine to produce parts to close tolerances. Checks parts intermittently to specified dimensions.
  • Recognizes improper machine functioning or cutting action of tools; troubleshoots and makes proper adjustments.
  • Re sharpens tooling using support equipment.
  • Applies complete knowledge of machinists hand and measuring tools.
  • Applies knowledge of metals, alloys, cutting oils and coolants, as required.
  • Performs S.P.C. charting from predetermined dimensions.
  • Performs knitting task.
  • Assist factory supervision and leaders in the training of machine operators.
  • Parts to be lifted and/or transported may weigh up to 30 lbs.
  • Keeps work area clean, safe and in an orderly fashion on a daily basis.
  • Performs other tasks of equal or lesser skill as required.
, Qualifications

Basic Qualifications

  • Minimum of 3 years' experience operating machinery as a Screw machine set up operator
  • Ability to read and understand manufacturers drawings, catalogs, and other written or verbal instructions.
  • Able to read/interpret part drawings, use quality tools (calipers, mics, comparators)
  • Mechanical experience
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
  • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
  • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

Physical Demands:

  • Must be able to lift/move 30 lbs. (may not exceed per EHS policies)
  • Must be able to stand for long periods of time

Preferred Qualifications:

  • 5 years' experience in machinery operations in screw machines
  • High school diploma or GED or or three or more years related experience and/or training; or equivalent combination of education and experience.

Benefits/Salary:

The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $22.73 to $37.00.

, About Us
Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at www.howmet.com/esg-report. Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube.
Equal Opportunity Employer:
Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.com
, About the Team
Howmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.
, Job Info
  • Job Identification 111594
  • Job Category Operations
  • Posting Date 01/17/2025, 12:25 AM
  • Locations 800 S State College, Fullerton, CA, 92831, US
  • Job Schedule Full time
  • Remote Work Schedule Availability? None
  • Export-Controlled Data This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items

 

Salary : $23 - $37

If your compensation planning software is too rigid to deploy winning incentive strategies, it’s time to find an adaptable solution. Compensation Planning
Enhance your organization's compensation strategy with salary data sets that HR and team managers can use to pay your staff right. Surveys & Data Sets

What is the career path for a Machining Tech V, Screw Machine - 2nd Shift?

Sign up to receive alerts about other jobs on the Machining Tech V, Screw Machine - 2nd Shift career path by checking the boxes next to the positions that interest you.
Income Estimation: 
$51,669 - $66,452
Income Estimation: 
$53,120 - $69,174
Income Estimation: 
$50,113 - $64,377
Income Estimation: 
$61,656 - $78,069
Income Estimation: 
$59,875 - $77,824
Income Estimation: 
$37,726 - $46,705
Income Estimation: 
$51,902 - $64,610
Income Estimation: 
$46,685 - $59,878
Income Estimation: 
$43,603 - $55,670
Income Estimation: 
$51,669 - $66,452
Income Estimation: 
$43,603 - $55,670
Income Estimation: 
$53,120 - $69,174
Income Estimation: 
$50,113 - $64,377
Income Estimation: 
$61,656 - $78,069
Income Estimation: 
$59,875 - $77,824
Income Estimation: 
$50,113 - $64,377
Income Estimation: 
$83,358 - $103,871
Income Estimation: 
$71,548 - $88,918
Income Estimation: 
$63,993 - $81,891
Income Estimation: 
$76,263 - $101,711
View Core, Job Family, and Industry Job Skills and Competency Data for more than 15,000 Job Titles Skills Library

Job openings at Howmet

Howmet
Hired Organization Address Tucson, AZ Full Time
Responsibilities Howmet Aerospace has an opening for an entry level Production Technician, Sleeve Heading in our Tucson ...
Howmet
Hired Organization Address La Porte, IN Full Time
Responsibilities Howmet Aerospace, headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced e...
Howmet
Hired Organization Address La Porte, IN Full Time
Responsibilities Howmet Aerospace, headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced e...
Howmet
Hired Organization Address La Porte, IN Full Time
Responsibilities Howmet Aerospace, headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced e...

Not the job you're looking for? Here are some other Machining Tech V, Screw Machine - 2nd Shift jobs in the Fullerton, CA area that may be a better fit.

Machine Helper - 2nd Shift

THE NEW-INDY GROUP, Cerritos, CA

AI Assistant is available now!

Feel free to start your new journey!