What are the responsibilities and job description for the ForkLift Operator 1st Shift (6am - 230pm) position at l'Oréal?
SalonCentric is an equal opportunity employer and affords equal opportunity to all applicants for all positions without regard to race, color, religion, gender (including pregnancy), national origin, age, disability, veteran status, sexual orientation or any other status protected under local, state or federal laws.
JOB SCOPE:
Individual's primary responsibilities include safely operating the forklift to load, unload & put away product. May also operate other equipment and break down and receive products from vendors. There are three different shifts. The individual's normal work hours are Monday through Friday. Occasionally it may be necessary for this individual to work outside of their normal scheduled hours; according to business needs. Overtime must be approved by your manager.
STANDARDS OF PERFORMANCE:
Responsibilities Include (but not limited to):
Activity (Hours per day)
Never
0 hours
Occasionally
Up to 3 hours
Frequently
3-6 hours
Constantly
6-8 hours
Sitting
X
Walking
X
Standing
X
Bending (neck)
X
Bending (waist)
X
Squatting / Crouching
X
Climbing
X
Kneeling
X
Crawling
X
Twisting (neck)
X
Twisting (waist)
X
Hand Use (dominant hand)
X
Repetitive use of hand
X
Simple grasping (right)
X
Simple grasping (left)
X
Power grasping (right)
X
Power grasping (left)
X
Fine manipulation (right)
X
Fine manipulation (left)
X
Pushing & pulling (right)
X
Pushing & pulling (left)
X
Reaching (forward)
X
Reaching (above shoulder level)
X
LIFTING
CARRYING
Never
Occ.
Freq.
Cont.
Height
Never
Occ.
Freq.
Cons.
Distance
0-10 lbs.
x
Floor to shoulder
X
Up to 25 ft.
11-20 lbs.
x
Floor to shoulder
X
Up to 25 ft.
21-35 lbs.
x
Floor to shoulder
X
Up to 25 ft.
36-50 lbs.
x
Floor to shoulder
X
Up to 5 ft.
51-75 lbs.
X
X
75 lbs.
X
X
Activity
Yes/No
Comments
Driving cars, trucks, forklifts and other equipment
Yes
Must be trained and certified to operate forklift (PIT's)
Working around equipment and machinery
Yes
Forklifts
Walking on uneven ground
No
Exposure to excessive noise
No
Exposure to extreme in temperature, humidity or wetness
No
Exposure to dust, gas, fumes or chemicals
No
Working at heights
No
Operation of foot controls or repetitive foot movement
No
Use of special visual or auditory protective equipment
No
Working with bio-hazards such as: blood borne pathogens, sewage, hospital waste, etc.
No
ESSENTIAL SAFETY DUTIES AND RESPONSIBILITIES
Individuals have a responsibility to carry out their assigned duties. For a health and safety program to achieve its desired results, everyone in a workplace must know their responsibilities:
1. Carry out work in a manner so as not to create a health and safety hazard to yourself or others.
2. Assist in the reduction and controlling of accident and illness-producing conditions.
3. Report any incidents, near misses, injuries, or illnesses.
4. Use the correct tools and equipment for the job. Keep tools in good condition.
5. Use the required safety equipment and protective clothing.
6. Report defects in workplace equipment.
7. Develop a personal concern for health and safety -- for yourself and for others, particularly new hires.
8. Read, understand, and comply with workplace health and safety policy, safe work practices and procedures.
9. Co-operate with health and safety committee members and representatives.
JOB SCOPE:
Individual's primary responsibilities include safely operating the forklift to load, unload & put away product. May also operate other equipment and break down and receive products from vendors. There are three different shifts. The individual's normal work hours are Monday through Friday. Occasionally it may be necessary for this individual to work outside of their normal scheduled hours; according to business needs. Overtime must be approved by your manager.
STANDARDS OF PERFORMANCE:
Responsibilities Include (but not limited to):
- Loading, unloading, shipping, and receiving products.
- Transporting and putting away material to different locations within the facility
- Optimizing loads to ensure operational efficiency.
- Securing loads to the forklift before transporting
- Completing pre- and post-check inspections on lifts to ensure they are safe to operate.
- Receiving and putting away incoming orders within a timely manner (48-hour window).
- Replenishing the stock from bulk bins to primary locations.
- Managing inventory by utilizing RF scanning equipment.
- Identifying workplace safety hazards.
- Adhering to production schedules.
- Ability to use computer and radio frequency devices (RF gun).
- Must be able to operate powered material handling equipment (order picker, pallet jack, etc.) safely. Individuals will be certified in the use of equipment.
- Must be able to meet department productivity KPI standards.
- Good work ethic and ability to interface effectively with others in the company.
- All work areas must be kept clean and free of debris.
- Individuals may be assigned to other warehouse duties as needed.
- High school diploma or general education degree (GED).
- Attention to detail is a must.
- Must be able to lift 40 lbs on a continual basis
- Must be able to read and write English
- Must be reliable and on time to work each day.
- Ability to learn to use computer and radio frequency devices (RF gun).
- Must be forklift certified and be able to use an order picker (train).
- Must be reliable and on-time to work each day.
- Ability to work with others in a fast-paced team environment.
Activity (Hours per day)
Never
0 hours
Occasionally
Up to 3 hours
Frequently
3-6 hours
Constantly
6-8 hours
Sitting
X
Walking
X
Standing
X
Bending (neck)
X
Bending (waist)
X
Squatting / Crouching
X
Climbing
X
Kneeling
X
Crawling
X
Twisting (neck)
X
Twisting (waist)
X
Hand Use (dominant hand)
X
Repetitive use of hand
X
Simple grasping (right)
X
Simple grasping (left)
X
Power grasping (right)
X
Power grasping (left)
X
Fine manipulation (right)
X
Fine manipulation (left)
X
Pushing & pulling (right)
X
Pushing & pulling (left)
X
Reaching (forward)
X
Reaching (above shoulder level)
X
LIFTING
CARRYING
Never
Occ.
Freq.
Cont.
Height
Never
Occ.
Freq.
Cons.
Distance
0-10 lbs.
x
Floor to shoulder
X
Up to 25 ft.
11-20 lbs.
x
Floor to shoulder
X
Up to 25 ft.
21-35 lbs.
x
Floor to shoulder
X
Up to 25 ft.
36-50 lbs.
x
Floor to shoulder
X
Up to 5 ft.
51-75 lbs.
X
X
75 lbs.
X
X
Activity
Yes/No
Comments
Driving cars, trucks, forklifts and other equipment
Yes
Must be trained and certified to operate forklift (PIT's)
Working around equipment and machinery
Yes
Forklifts
Walking on uneven ground
No
Exposure to excessive noise
No
Exposure to extreme in temperature, humidity or wetness
No
Exposure to dust, gas, fumes or chemicals
No
Working at heights
No
Operation of foot controls or repetitive foot movement
No
Use of special visual or auditory protective equipment
No
Working with bio-hazards such as: blood borne pathogens, sewage, hospital waste, etc.
No
ESSENTIAL SAFETY DUTIES AND RESPONSIBILITIES
Individuals have a responsibility to carry out their assigned duties. For a health and safety program to achieve its desired results, everyone in a workplace must know their responsibilities:
1. Carry out work in a manner so as not to create a health and safety hazard to yourself or others.
2. Assist in the reduction and controlling of accident and illness-producing conditions.
3. Report any incidents, near misses, injuries, or illnesses.
4. Use the correct tools and equipment for the job. Keep tools in good condition.
5. Use the required safety equipment and protective clothing.
6. Report defects in workplace equipment.
7. Develop a personal concern for health and safety -- for yourself and for others, particularly new hires.
8. Read, understand, and comply with workplace health and safety policy, safe work practices and procedures.
9. Co-operate with health and safety committee members and representatives.
