HyCO Electrical and Instrumentation Technician

Founded in 1927, MATHESON is one of the largest compressed gas providers in the world. MATHESON provides everything from onsite air separation plants to small portable gas cylinders and all the services required to support these products and customer applications. We offer semiconductor, medical, welding, bulk, and cylinder gases for customers across the country. MATHESON has over 300 locations and more than 4500 employees in the U.S.

Schedule: Day Shift Schedule with ability to work 4x10s (24/7on-call requirement)

Job Summary:

The HyCO E/I Technician is responsible for providing instrumentation and electrical support to the three Matheson Tri-Gas Steam Methane Reforming Hydrogen plants in Saraland AL, McIntosh AL, and Pensacola, FL with a strong focus on critical safety systems and system reliability. The jobholder will be based at Saraland and will be reporting to the Site Manager, but will also have responsibilities for the other two locations working collaboratively with the Instrument Technician at Pensacola. The jobholder will perform calibrations, troubleshooting and repairs as required in an operational process facility with a focus on personal and site safety.

Job Requirements:

• Contribute to team awareness of co-worker and personal safety through proper work habits, good housekeeping skills, and appropriate use of personal protective equipment.
• Pressure Instruments- Work in shop and field to adjust and calibrate pressure measuring and recording devices. Adjust and calibrate pressure-measuring devices, repair and replace damaged parts.
• Temperature Instruments- Work in shop and field to adjust and calibrate temperature measuring and recording devices. Adjust and calibrate temperature-measuring devices, and repair and replace damaged parts.
• Level Measurements- Work in shop and field to adjust and calibrate level measuring and recording devices. Adjust and calibrate level measuring devices, repair and replace damaged parts.
• Flow Measuring and Control- Work in shop and field on repair, adjustment, calibration, and inspection of flow measuring and control instruments. Mechanical and electrical devices. Variable orifice-fixed orifice-volumetric. Computation of flow data, flow of solids in suspension.
• Instrument Mechanisms- Repair, adjust and replace worn parts, gears, racks segments, hairsprings, jewel bearings, and clock works. Repair and replace electrical contacts and coils. Repair hydraulically operated valves, diaphragm valves, and solenoid operated valves.
• Control Valves and Devices- Shop and fieldwork in the adjustment of control valves, involving diaphragms, hydraulic cylinders, hydraulic valves, floats, and dampers. Adjustment of pneumatic, electric, and electronic controls.
• Remove, install, clean, calibrate, maintain and troubleshoot electrical, instrumentation and distributed control equipment throughout the facility safely and professionally. Equipment may include various transmitters, positioners, transducers, meters, relays, switches, instruments, systems and devices.
• Troubleshoot electrical and instrumentation issues including switchgears, control panels, transmitters, control valves, transformers, relays, motor starters, breakers, control wiring and UPS systems.
• Troubleshoot analyzer issues. Perform routine analyzer maintenance.
• Electronic Maintenance and Troubleshooting- Service and maintain all electronic equipment as well as familiarizing oneself with the equipment they service. Be able to use the necessary test equipment to service this equipment. This will include drive systems, programmable controllers, microprocessors, recorders, counters, speed indicators, process control type equipment, and any and all other electronic equipment in the plant.
• Maintenance of pneumatic and motor operated valves and actuators.
• Read and understand various single line, 3 line, electrical, pneumatic, piping and instrumentation diagrams and drawings.
• Knowledge of plant equipment including transmitters and control valves.
• Working knowledge of electrical arc flash and shock hazards (NFPA 70E) with the ability to select the proper Personal Protective Equipment (PPE) for the task.
• Maintain safe and reliable operations by performing installation, inspection calibration, configuration, maintenance, diagnostics, associated documentation, technical support, and training.
• Support covers a broad spectrum of motor controls, pneumatic controls, AC/DC controls, instrumentation and various communication protocols.
• Takes a logical approach to troubleshooting.
• Applies solid working knowledge and experience to solve moderately complex problems with supervision.
• Assists Regional Management in execution of Electrical and Instrumentation duties at other Matheson locations during Plant Turnaround or in assisting resolution of reliability concerns.
• The candidate should possess good communication and interpersonal skills and be able to interface frequently with customers (primarily internal but some external customer communications will be required).
• The candidate will be expected to work collaboratively alongside the Instrument Technician at Pensacola, FL to develop and expand their working knowledge of electrical and instrumentation processes. They must endeavor to complete work assignments and training allocated to enable their effective growth.
• The candidate will be expected to provide Call-In Vacation coverage where needed of the Instrument Technician at Pensacola, FL and respond to emergency events at that location should they occur.
• The candidate must possess, or be willing to acquire, a working knowledge of the hydrogen steam methane reformation process.
• The candidate must be willing to be on call and should expect a minimum of 10% overtime.

Job Responsibilities:

• Performs all of the administrative and reporting tasks of the position including:
• Maintains operating and maintenance history for equipment as required
• Prepares and maintains documentation of work orders, service reports and equipment calibrations
• Ensures spare parts are available or replaced when used / installed
• Plans and coordinates contractors to site when needed
• Organize and maintains a neat, clean and orderly workspace, and contribute to these ideals throughout the site
• Provide relief shift operations control room coverage as required to support vacation schedules and other facility events

​Administrative and Managerial:

• ​Follow all Quality Control requirements to ensure a quality product is delivered to Matheson’s customers. Meet FDA requirements where applicable.
• Follow all Environmental guidelines and reporting requirements to ensure all applicable regulations are followed.
• Document in plant logbook date and time of all machinery start/stops, analyzer calibrations, process upsets, product losses, customer complaints, or any other major event(s).
• Maintain open continuous line of communication with all HYCO Managers and I/E Technicians.
• Complete required SHE site and safety equipment inspection forms.
• Maintain orderly and clean work in work shop and plant process areas.
• Direct and monitor contractors.
• Maintain process instrumentation equipment calibration records.
• Lead and participate in plant safety meetings.
• Participate in safety committee activities as required – drill planning, energy isolation reviews, etc.
• Complete all training activities according to schedule and meet annual performance goals.
• Support Operations Technicians through coaching and mentoring of site I/E equipment and Process Control Systems.
• Check business email daily.
• Interface with Customer’s Maintenance Team regarding shared Process Control elements, Instrumentation and Safety related issues.
• Accept On call duty and overtime as required.
• Effectively prioritize and help to plan all maintenance work activities and operations schedules.
• Support sites outside of the home area as required.
• Support plant and equipment commissioning activities.
• Mark-up engineering drawings to document changes or disparities following the EMOC process.
• Identify cost effective solutions to process problems, follow company purchasing procedure and spending limitations.

Additional Requirements: (Willing to be on call 24/7)

• Education - High School Diploma
• Education - Trade/Technical degree or apprenticeship in a related field
• Eight years of relevant experience within a technical discipline (Electrical, Mechanical or Instrumentation).
• Competent understanding of electricity and electrical theory.
• Strong Industrial Instrumentation Knowledge and Experience
• Strong Industrial Mechanical Knowledge and Experience
• Experience of PLC and DCS preferred, especially Emerson (Delta V)
• Strong troubleshooting Skills
• Previous Experience with 4160 V Power Systems
• Previous Fieldbus Experience
• Strong personal safety philosophy
• Clean Driving Record
• Ability to Travel For Training
• Preferred HVAC/Chiller System Experience
• Preferred Gas Chromatography Knowledge
• Strong Computer Skills
• Must be team oriented and have a willingness to learn and further develop technical skills in this position.
• Ability to Follow Safety Protocols
• Ability to Multi Task

Matheson is an Equal Opportunity Employer that complies with the laws and regulations set forth under EEOC. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Type: Full-time

Pay: From $45.00 per hour

Expected hours: 40 per week

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

Schedule:

• 10 hour shift
• 4x10
• Day shift
• On call

Education:

• High school or equivalent (Required)

Experience:

• Electrical: 8 years (Required)
• Instrumentation: 8 years (Required)
• Mechanical: 8 years (Preferred)
• leadership: 3 years (Preferred)
• working on analytical equipment: 8 years (Preferred)

Shift availability:

• Day Shift (Required)

Ability to Relocate:

• Saraland, AL 36571: Relocate before starting work (Required)

Work Location: In person

Salary : $45