What are the responsibilities and job description for the Senior Engineering Technician position at New York State Center for Recruitment & Public Service?
Description
Duties Description
Under the supervision of the Base Civil Engineer, the Senior Engineering Technician assists in the performance of civil engineering work and provides engineering support services through the inspection of construction projects, participation in field survey work, management of small project survey parties, collection and analyzation of engineering data, review of contracts and contract specifications, and preparation and review of maps and plans.
The position performs responsibilities in accordance with National Guard Bureau (NGB) standards (and where applicable those requirements of the Master Cooperative Agreement between the NGB and the DMNA), as well as agency and labor contract duties and responsibilities – current and as amended. The position may report to state and/or federal supervisory personnel.
Specifically, Senior Engineering Technician duties and responsibilities include, but are not limited to:
Minimum Qualifications
Three years of full time satisfactory experience in field or office civil engineering work. Training may be substituted or combined with work experience to meet the three year requirement as follows:
Two years technical experience in the field of automated cartography; or completion of two years of college or technical institute studies in cartography, computer-aided drafting (CAD), Geographic Information Systems (GIS), or planning and surveying.
AND
Must be at least 18 years of age and have a high school diploma or GED.
Must have and maintain a valid driver’s license to operate a motor vehicle in the State of New York. May be required to utilize vehicles for site visits and other travel. Must report any changes in driver’s license status to supervisory chain of command.
May be required to acquire and maintain a military driver’s license to operate military vehicles and equipment in accordance with NGB standards to include medical evaluation requirements – current and as amended.
In accordance with NGB standards, will be required to obtain and maintain a favorable background investigation, and have an appropriate clearance to allow access to computer networks and restricted areas to determine suitability, loyalty, and trustworthiness. Minimally a National Agency Check with Inquiry (NACI) will be completed - dependent on current regulation, a SECRET clearance may be required – especially at Air Bases when flight line access requires SECRET.
Must be comfortable working at heights such as climbing ladders, working on scaffolds, platforms and lifts.
Must be able to read and write in English.
Must have demonstrated knowledge and qualifying experience in the use of CAD and GIS software.
Must be familiar with and be able to independently use commonly utilized software programs such as Microsoft Word and Excel.
Required to have or successfully complete within 90 days of receiving computer access, all SFS, SLMS and other computer training as related to position duties.
Upon hire must meet and maintain as necessary any and all New York State or Federal certification/license requirements. Should regulations or statutes require additional recertification or training in the future, employee will be required to meet such additional training requirements.
At all times, the employee MUST maintain minimum standards in accordance with current , and as amended, agency, statutory and NGB requirements and directives; failure to do so will subject the individual to disciplinary action, including possible termination.
NOTE: Position standards illustrate the nature, extent and scope of duties and responsibilities of the position described. Standards cannot and do not include all of the work that might be appropriately performed by the incumbent. The minimum qualifications above are those which were required for appointment at the time the Position Standards were written. Please contact State Human Resources Management for any further information regarding the position requirements.
Additional Comments
This position is not in the Classified Service of New York State, but is covered under New York State Military Law. If selected, current Civil Service employees will lose their seniority within the Classified Service, thereby exempting them from applying for promotional exams within Civil Service.
Current Start Rate: $51,857
Job Rate: $63,169
(*All hires begin at “Start Rate” unless prior state experience affords eligibility for hiring step increase as determined by OSC.)
Duties Description
Under the supervision of the Base Civil Engineer, the Senior Engineering Technician assists in the performance of civil engineering work and provides engineering support services through the inspection of construction projects, participation in field survey work, management of small project survey parties, collection and analyzation of engineering data, review of contracts and contract specifications, and preparation and review of maps and plans.
The position performs responsibilities in accordance with National Guard Bureau (NGB) standards (and where applicable those requirements of the Master Cooperative Agreement between the NGB and the DMNA), as well as agency and labor contract duties and responsibilities – current and as amended. The position may report to state and/or federal supervisory personnel.
Specifically, Senior Engineering Technician duties and responsibilities include, but are not limited to:
- Perform field tests of materials and construction, such as compaction tests and concrete air content tests.
- Visually inspect projects to determine compliance with specifications and commonly accepted construction methods and standards.
- Compute quantities of materials used, such as volumes, lengths, and batch slip weights, to determine correct payment of contract estimates.
- Provide routine interpretations of construction specifications to
- Meet with contractor’s on-site project supervisor to discuss and resolve problems noted during inspection, prepare inspection reports, noting problems and methods to correct them.
- Assist in or compiles records for projects from beginning of construction to completion.
- Gather all information needed for preparation of contract plans.
- Provide computer-aided drafting (CAD) support in the performance of field and technical investigations, drafting, surveying assistance, contract management, and engineering consulting.
- Provide Geographic Information Systems (GIS) support in the preparation of maps, sketches and diagrams of sites and proposed projects from data gathered from field surveys and office records.
- Prepares estimates of quantities of different materials needed for individual projects and calculates estimated project costs by pricing material and labor at prevailing rates.
- Prepare draft narrative and graphic material for inclusion in contract specifications.
- Assist in preparing alternate project plans, including evaluating efforts of different proposals on surrounding area and population and summarizing cost of alternatives.
- Perform engineering research and planning activities.
- May perform supervisory duties at assigned facility/s including but not limited to training, direct supervision, and assist in performance evaluations of subordinate staff. May fill-in for supervisor during absences as needed.
- Periodic overtime may be required
- Periodic travel may be required to other facilities; to attend training; or other requirements related to duties as needed.
- Other job duties as assigned.
Minimum Qualifications
Three years of full time satisfactory experience in field or office civil engineering work. Training may be substituted or combined with work experience to meet the three year requirement as follows:
- An Associate degree from a technical institute or community college in engineering science, civil engineering technology, or architectural technology for two years of the experience.
- College training leading to a Bachelor’s degree in engineering or architecture, on a year-for-year basis.
- Any satisfactory combination of technical institute, community college or college training in engineering science, civil engineering technology, architectural technology, or college training as described above, on a year for year basis.
Two years technical experience in the field of automated cartography; or completion of two years of college or technical institute studies in cartography, computer-aided drafting (CAD), Geographic Information Systems (GIS), or planning and surveying.
AND
Must be at least 18 years of age and have a high school diploma or GED.
Must have and maintain a valid driver’s license to operate a motor vehicle in the State of New York. May be required to utilize vehicles for site visits and other travel. Must report any changes in driver’s license status to supervisory chain of command.
May be required to acquire and maintain a military driver’s license to operate military vehicles and equipment in accordance with NGB standards to include medical evaluation requirements – current and as amended.
In accordance with NGB standards, will be required to obtain and maintain a favorable background investigation, and have an appropriate clearance to allow access to computer networks and restricted areas to determine suitability, loyalty, and trustworthiness. Minimally a National Agency Check with Inquiry (NACI) will be completed - dependent on current regulation, a SECRET clearance may be required – especially at Air Bases when flight line access requires SECRET.
Must be comfortable working at heights such as climbing ladders, working on scaffolds, platforms and lifts.
Must be able to read and write in English.
Must have demonstrated knowledge and qualifying experience in the use of CAD and GIS software.
Must be familiar with and be able to independently use commonly utilized software programs such as Microsoft Word and Excel.
Required to have or successfully complete within 90 days of receiving computer access, all SFS, SLMS and other computer training as related to position duties.
Upon hire must meet and maintain as necessary any and all New York State or Federal certification/license requirements. Should regulations or statutes require additional recertification or training in the future, employee will be required to meet such additional training requirements.
At all times, the employee MUST maintain minimum standards in accordance with current , and as amended, agency, statutory and NGB requirements and directives; failure to do so will subject the individual to disciplinary action, including possible termination.
NOTE: Position standards illustrate the nature, extent and scope of duties and responsibilities of the position described. Standards cannot and do not include all of the work that might be appropriately performed by the incumbent. The minimum qualifications above are those which were required for appointment at the time the Position Standards were written. Please contact State Human Resources Management for any further information regarding the position requirements.
Additional Comments
This position is not in the Classified Service of New York State, but is covered under New York State Military Law. If selected, current Civil Service employees will lose their seniority within the Classified Service, thereby exempting them from applying for promotional exams within Civil Service.
Current Start Rate: $51,857
Job Rate: $63,169
(*All hires begin at “Start Rate” unless prior state experience affords eligibility for hiring step increase as determined by OSC.)
Salary : $51,857
