What are the responsibilities and job description for the Power System Modelling Engineer position at Powertech Labs?
Job Details
Job Description
Job Description
The Engineering Service Business Unit focuses on power system software development, power system and substation consulting studies and compliance testing services for electric utilities and other clients in power industry. We are the vendor of the cutting-edge power system analysis software package, DSATools , recognized globally as leading-edge software platforms for dynamic security assessment of complex power systems for both off-line (system planning) and on-line applications (near-real-time operation).
Our team provides a full spectrum of study services from fast electromagnetic transient switching studies, power system planning and operation studies (including transient, small-signal, voltage, and frequency stabilities), post-mortem investigation of system disturbances and events, generation and load interconnection studies, generator including wind and solar renewables, and load model development or validation via field testing, and to NERC compliance studies (e.g., TPL, PRC, MOD, CIP, etc.).
In addition, our Real-Time Digital Simulator (RTDS)-equipped protection and control lab provides unlimited potential for testing and evaluation of new control, protection, and communication devices and schemes.
The successful applicant is expected to lead testing activities for model validation and control tuning for generation plants including wind, solar and energy storage systems, as well as perform model validation and other simulation studies per NERC and other applicable reliability standards.
Key responsibilities include :
* Review power plant technical documents to prepare unit specific test plans per applicable requirements.
* Travel to industrial sites in multiple countries and carry out onsite generator model validation testing
* Perform simulation study and prepare detailed engineering reports
* Perform peer review on technical reports
* Present study results or reports to clients and act as a subject matter expert
* Assist in proposal development in response to request for proposal (RFP), cost estimates, work schedules and/or developing work scope to meet clients needs
Qualifications
* The successful applicant preferably will have a Master s degree in Electrical Engineering specialized in power system. Applicants who have bachelor s degree in Electrical Engineering with direct relative work experience will be considered.
* Registered (or able to immediately register) as Professional Engineer with Engineers and Geoscientists of BC (EGBC).
* Minimum of 8 years of working experience in Electrical Engineering with expertise in the areas of protection and control, power system analysis, or related post-graduate research. Equivalent combination of education and experience may be considered.
* Preference will be given to candidates with knowledge and demonstrated experiences on the following:
- power plant (thermal, solar, wind, BESS, etc.) site commissioning and testing including regular field work following procedures, data collection using digital DAQ systems, control equipment function and communication troubleshooting.
- power plant and generator protection and control theory and practice on relay instruments (SEL, Beckwith, GE Multilin, etc.).
- strong understanding of generator and renewable modeling, power system and/or substation protections and control systems of synchronous generators, renewables, FACTs, etc.
- power system simulation software (DSA Tools, PSS/E, PSLF, PSCAD, etc.) is considered an asset. Proven Project Management and client-facing customer skills are highly desirable.
* Must be eligible and willing to work and travel to the US for site testing.
* Must hold a valid class 5 BC driver s license or equivalent.
In addition, the following are desired competencies:
* Strong verbal and written communication skills and the ability to effectively communicate with diverse audiences and stakeholders.
* Uncompromising dedication to safety and quality.
* Ability to work independently and with a team and role model high standards of professionalism.
* Experience working in multi-disciplinary project teams
Job Status: Full-Time Regular
Job Affiliation: M&P
Job location : Surrey, B.C. / Hybrid work model will be considered after close review of probation period
Level: P3
* Candidates with lesser experience are welcome to apply and will be considered at an appropriate level after an evaluation of their technical experience.
Please be advised that this role has been assessed as safety sensitive and pre-qualification alcohol and drug testing will be required as a pre-condition to employment.
As part of the selection process, applicants may be required to complete a written test/assessment and/or a presentation as part of the interview process.
Powertech Labs is an equal opportunity employer. We include everyone. We welcome applications from anyone, including members of visible minorities, women, Indigenous peoples, persons with disabilities, persons of minority sexual orientations and gender identities, and others with the skills and knowledge to productively engage with diverse communities. We are also happy to provide reasonable accommodations throughout the selection process and while working at Powertech Labs.
Maintaining customer-confidence and our reputation is key: To this end, all our campus and laboratories are accredited to ISO9001 (quality), ISO14001 (environment stewardship) and ISO45001 (safety) and IEC/ISO 17025 for over 100 standards. To complement the focus on accreditation, we encourage our experts to drive global standards and provide development opportunities for all staff to grow in their role and to advance in their careers.
Working at Powertech is not a job but a career. If you want to be a part of a growing clean technology company that is impactful and working towards a common goal of accelerating the world towards a net zero carbon future, come and join our team.
Our team provides a full spectrum of study services from fast electromagnetic transient switching studies, power system planning and operation studies (including transient, small-signal, voltage, and frequency stabilities), post-mortem investigation of system disturbances and events, generation and load interconnection studies, generator including wind and solar renewables, and load model development or validation via field testing, and to NERC compliance studies (e.g., TPL, PRC, MOD, CIP, etc.).
In addition, our Real-Time Digital Simulator (RTDS)-equipped protection and control lab provides unlimited potential for testing and evaluation of new control, protection, and communication devices and schemes.
The successful applicant is expected to lead testing activities for model validation and control tuning for generation plants including wind, solar and energy storage systems, as well as perform model validation and other simulation studies per NERC and other applicable reliability standards.
Key responsibilities include :
* Review power plant technical documents to prepare unit specific test plans per applicable requirements.
* Travel to industrial sites in multiple countries and carry out onsite generator model validation testing
* Perform simulation study and prepare detailed engineering reports
* Perform peer review on technical reports
* Present study results or reports to clients and act as a subject matter expert
* Assist in proposal development in response to request for proposal (RFP), cost estimates, work schedules and/or developing work scope to meet clients needs
Qualifications
* The successful applicant preferably will have a Master s degree in Electrical Engineering specialized in power system. Applicants who have bachelor s degree in Electrical Engineering with direct relative work experience will be considered.
* Registered (or able to immediately register) as Professional Engineer with Engineers and Geoscientists of BC (EGBC).
* Minimum of 8 years of working experience in Electrical Engineering with expertise in the areas of protection and control, power system analysis, or related post-graduate research. Equivalent combination of education and experience may be considered.
* Preference will be given to candidates with knowledge and demonstrated experiences on the following:
- power plant (thermal, solar, wind, BESS, etc.) site commissioning and testing including regular field work following procedures, data collection using digital DAQ systems, control equipment function and communication troubleshooting.
- power plant and generator protection and control theory and practice on relay instruments (SEL, Beckwith, GE Multilin, etc.).
- strong understanding of generator and renewable modeling, power system and/or substation protections and control systems of synchronous generators, renewables, FACTs, etc.
- power system simulation software (DSA Tools, PSS/E, PSLF, PSCAD, etc.) is considered an asset. Proven Project Management and client-facing customer skills are highly desirable.
* Must be eligible and willing to work and travel to the US for site testing.
* Must hold a valid class 5 BC driver s license or equivalent.
In addition, the following are desired competencies:
* Strong verbal and written communication skills and the ability to effectively communicate with diverse audiences and stakeholders.
* Uncompromising dedication to safety and quality.
* Ability to work independently and with a team and role model high standards of professionalism.
* Experience working in multi-disciplinary project teams
Job Status: Full-Time Regular
Job Affiliation: M&P
Job location : Surrey, B.C. / Hybrid work model will be considered after close review of probation period
Level: P3
* Candidates with lesser experience are welcome to apply and will be considered at an appropriate level after an evaluation of their technical experience.
Please be advised that this role has been assessed as safety sensitive and pre-qualification alcohol and drug testing will be required as a pre-condition to employment.
As part of the selection process, applicants may be required to complete a written test/assessment and/or a presentation as part of the interview process.
Powertech Labs is an equal opportunity employer. We include everyone. We welcome applications from anyone, including members of visible minorities, women, Indigenous peoples, persons with disabilities, persons of minority sexual orientations and gender identities, and others with the skills and knowledge to productively engage with diverse communities. We are also happy to provide reasonable accommodations throughout the selection process and while working at Powertech Labs.
Maintaining customer-confidence and our reputation is key: To this end, all our campus and laboratories are accredited to ISO9001 (quality), ISO14001 (environment stewardship) and ISO45001 (safety) and IEC/ISO 17025 for over 100 standards. To complement the focus on accreditation, we encourage our experts to drive global standards and provide development opportunities for all staff to grow in their role and to advance in their careers.
Working at Powertech is not a job but a career. If you want to be a part of a growing clean technology company that is impactful and working towards a common goal of accelerating the world towards a net zero carbon future, come and join our team.
Powered by JazzHR
IhuSBhdQB4
Employers have access to artificial intelligence language tools (“AI”) that help generate and enhance job descriptions and AI may have been used to create this description. The position description has been reviewed for accuracy and Dice believes it to correctly reflect the job opportunity.