What are the responsibilities and job description for the Quality/ Electronics Calibration Technician (On-Site) position at Quality Calibration Service, Inc.?
Job Description
Job Description:
A diversified position that will involve Gage Management, Gage and Electronic Test Instrument Calibration and Minor Repair of customer gages and equipment . Gage management will involve utilizing On-Line Gage Management Software. Major duties also include calibration of Electronic Test Equipment and some other misc. hand ages to required specifications in accordance with ANSI, Military, Federal, and Manufacturer Specifications. Measurements are recorded for generation of long form certificates traceable to The N.I.S.T. Calibrations are performed in a climate controlled laboratory environment. Duties also include calibration and repairs on mechanical hand tool gages such as calipers, micrometers, indicators, torque tools, pressure gages, height gages, Force gages, pressure gages etc. Ideal candidate should have experience using and repairing most types of inspection gages and Electronic Test Equipment. Calibration is performed to applicable standards and procedures. Gages that require minor repair will be disassembled, thoroughly cleaned and adjusted. If applicable, worn and broken parts will be replaced as required in order to return gages back to proper functionality and compliance to the required specified tolerances and standards. Gages requiring major repair will be sent back to QCS Corporate Metrology Center for repair. Will train qualified candidates.
Job Duties (include but not limited to):
All work is performed in accordance to specific procedures that comply with various standards and specifications. Calibration data is collected by taking measurements and recording the readings in QCS custom developed applications for generation of Long Form Certificate of Calibration. Where applicable, adjustments, and repairs are made to bring the gages/ instruments into tolerance. Requires knowledge of gage application and functionality and be able to determine if a gage is in or out of tolerance by performing basic math. Must be able to follow and understand the calibration and repair procedures & techniques while possessing the appropriate analytical abilities.
Qualifications
QCS is an ISO/IEC 17025 Accredited full service metrology lab established in 1984 that provides calibration services to the Aerospace, Automotive, Defense, Medical, Nuclear, and all other General, Manufacturing sectors. QCS calibrates Hard Gages (i.e. Gage Blocks, Cylindrical and Threaded - Plugs, Rings, & Pins, etc.), QCS also performs calibration and repair of Electro-Mechanical Gage Hand Tools (i.e. Micrometers, Calipers, Indicators, Torque, Force, Pressure, Height Gages, Mass, etc.), Electronic Test & Measurement Equipment (Oscilloscopes, Multi-meters, Frequency Counters, Signal Generators, Hypots,etc.).OCS offers on-site services for the calibration of CMM’s, Hand Tools, Surface Plates, Optical Comparators, Hardness Testers, Electronic Instrumentation, and more. In addition QCS provides 1st Article Dimensional Inspection Services utilizing our touch probe and Video CMM’s)
QCS has one of the broadest scopes of Accreditation of any lab in the country while maintaining one of the finest reputations in the industry for nearly 40 years. QCS has one of the finest Metrology facilities in the country containing 6 state of the art climate & environmentally controlled laboratories situated within our 20K sq. ft building providing an extremely pleasurable working environment.
QCS is an ISO/IEC 17025 Accredited full service metrology lab established in 1984 that provides calibration services to the Aerospace, Automotive, Defense, Medical, Nuclear, and all other General, Manufacturing sectors. QCS calibrates Hard Gages (i.e. Gage Blocks, Cylindrical and Threaded - Plugs, Rings, & Pins, etc.), QCS also performs calibration and repair of Electro-Mechanical Gage Hand Tools (i.e. Micrometers, Calipers, Indicators, Torque, Force, Pressure, Height Gages, Mass, etc.), Electronic Test & Measurement Equipment (Oscilloscopes, Multi-meters, Frequency Counters, Signal Generators, Hypots,etc.).OCS offers on-site services for the calibration of CMM’s, Hand Tools, Surface Plates, Optical Comparators, Hardness Testers, Electronic Instrumentation, and more. In addition QCS provides 1st Article Dimensional Inspection Services utilizing our touch probe and Video CMM’s) QCS has one of the broadest scopes of Accreditation of any lab in the country while maintaining one of the finest reputations in the industry for nearly 40 years. QCS has one of the finest Metrology facilities in the country containing 6 state of the art climate & environmentally controlled laboratories situated within our 20K sq. ft building providing an extremely pleasurable working environment.
Job Description:
A diversified position that will involve Gage Management, Gage and Electronic Test Instrument Calibration and Minor Repair of customer gages and equipment . Gage management will involve utilizing On-Line Gage Management Software. Major duties also include calibration of Electronic Test Equipment and some other misc. hand ages to required specifications in accordance with ANSI, Military, Federal, and Manufacturer Specifications. Measurements are recorded for generation of long form certificates traceable to The N.I.S.T. Calibrations are performed in a climate controlled laboratory environment. Duties also include calibration and repairs on mechanical hand tool gages such as calipers, micrometers, indicators, torque tools, pressure gages, height gages, Force gages, pressure gages etc. Ideal candidate should have experience using and repairing most types of inspection gages and Electronic Test Equipment. Calibration is performed to applicable standards and procedures. Gages that require minor repair will be disassembled, thoroughly cleaned and adjusted. If applicable, worn and broken parts will be replaced as required in order to return gages back to proper functionality and compliance to the required specified tolerances and standards. Gages requiring major repair will be sent back to QCS Corporate Metrology Center for repair. Will train qualified candidates.
Job Duties (include but not limited to):
All work is performed in accordance to specific procedures that comply with various standards and specifications. Calibration data is collected by taking measurements and recording the readings in QCS custom developed applications for generation of Long Form Certificate of Calibration. Where applicable, adjustments, and repairs are made to bring the gages/ instruments into tolerance. Requires knowledge of gage application and functionality and be able to determine if a gage is in or out of tolerance by performing basic math. Must be able to follow and understand the calibration and repair procedures & techniques while possessing the appropriate analytical abilities.
Qualifications
- Must be capable of working effectively individually or in a team environment with minimal supervision.
- 2 year technical school degree or equivalent level of education and/or work experience in a Quality or manufacturing discipline where gages and Electronic Test Equipment were used, or Military (PMEL) training /experience.
- Must be able to follow verbal and written instruction.
- Good Math Skills
- Must possess initiative, self motivation and leadership capabilities.
- Ability to obtain and maintain accurate records & certifications.
- Strong computer skills
- Ability to work with data bases and know how to properly store and retrieve data
- Good Understanding Of Electrical Theory and Applications
- Good Troubleshooting skills
- Must have good communication skills and a professional appearance due to interface with customers.
- Health Insurance
- Dental Insurance
- 401K Plan
- Paid Vacation
- Vision Insurance
- Paid Holidays
QCS is an ISO/IEC 17025 Accredited full service metrology lab established in 1984 that provides calibration services to the Aerospace, Automotive, Defense, Medical, Nuclear, and all other General, Manufacturing sectors. QCS calibrates Hard Gages (i.e. Gage Blocks, Cylindrical and Threaded - Plugs, Rings, & Pins, etc.), QCS also performs calibration and repair of Electro-Mechanical Gage Hand Tools (i.e. Micrometers, Calipers, Indicators, Torque, Force, Pressure, Height Gages, Mass, etc.), Electronic Test & Measurement Equipment (Oscilloscopes, Multi-meters, Frequency Counters, Signal Generators, Hypots,etc.).OCS offers on-site services for the calibration of CMM’s, Hand Tools, Surface Plates, Optical Comparators, Hardness Testers, Electronic Instrumentation, and more. In addition QCS provides 1st Article Dimensional Inspection Services utilizing our touch probe and Video CMM’s)
QCS has one of the broadest scopes of Accreditation of any lab in the country while maintaining one of the finest reputations in the industry for nearly 40 years. QCS has one of the finest Metrology facilities in the country containing 6 state of the art climate & environmentally controlled laboratories situated within our 20K sq. ft building providing an extremely pleasurable working environment.
QCS is an ISO/IEC 17025 Accredited full service metrology lab established in 1984 that provides calibration services to the Aerospace, Automotive, Defense, Medical, Nuclear, and all other General, Manufacturing sectors. QCS calibrates Hard Gages (i.e. Gage Blocks, Cylindrical and Threaded - Plugs, Rings, & Pins, etc.), QCS also performs calibration and repair of Electro-Mechanical Gage Hand Tools (i.e. Micrometers, Calipers, Indicators, Torque, Force, Pressure, Height Gages, Mass, etc.), Electronic Test & Measurement Equipment (Oscilloscopes, Multi-meters, Frequency Counters, Signal Generators, Hypots,etc.).OCS offers on-site services for the calibration of CMM’s, Hand Tools, Surface Plates, Optical Comparators, Hardness Testers, Electronic Instrumentation, and more. In addition QCS provides 1st Article Dimensional Inspection Services utilizing our touch probe and Video CMM’s) QCS has one of the broadest scopes of Accreditation of any lab in the country while maintaining one of the finest reputations in the industry for nearly 40 years. QCS has one of the finest Metrology facilities in the country containing 6 state of the art climate & environmentally controlled laboratories situated within our 20K sq. ft building providing an extremely pleasurable working environment.