What are the responsibilities and job description for the Millwright - SPW Plywood Maintenance position at Swanson Group?
Position Title : Millwright Reports To : Lead Millwright Department : SPW Maintenance Hours per shift : Employee works four 12-hour shifts, with three 10-minute breaks, and 30-minute unpaid lunch. Day : 5 : 00PM - 5 : 00PM Nights : 5 : 00PM - 5 : 00AM Wage : $32.76 (DOE) Position Purpose : Maximize mill efficiency via preventive maintenance, repair / modification of machinery, and installation of new machinery.
Works closely with Maintenance Director, lead millwright, electricians, production supervisors, machine operators, and cleanup.
Follow lock out, safety and PPE policies.
Responsible for completing PM’S that are a sign to them.
Whistle chasing.
Fabrication and installing equipment.
Work with millwrights.
Communicate with operators and lead millwright. Position Functions : Entry Level Production Associate : Essential Functions
- These duties are designated as ADA Essential Functions and must be performed in this job. Perform preventive maintenance on machinery.
Complete PM’s as scheduled. Repair / modify / align machinery – troubleshoot equipment problems.
Repair / modify mechanical, hydraulic, pneumatic, and gravitational components of machinery. After repair is completed, check / operate repaired item for proper operation. Order appropriate replacement parts and record any further work to be done on “Work List”. Install new machinery.
Read and follow blueprints and other specification SOP documents. Learn to operate machine centers.
Assist with pre-shift warm-up of machinery. Housekeeping – clean and organize shop and parts. Operate forklift, manlift, hoist, crane, key cutters, drills, presses. Weld and fabricate using arc and wire feed welders, cutting torch and track burners. Work with a Safety-First attitude using the ACES as a guideline for all decision making. Special projects as assigned.
Work in confined spaces as required. Non-Essential Functions These duties are secondary in nature and are not classified as ADA essential. Perform other duties and functions as assigned by supervisor for production and cleaning purpose. Working Environment : (1) Inside 50%, average temperature 80 degrees, extreme low temperature 10 degrees F, extreme high temperature 120 degrees F. (2) Outside 50%. Noise or vibration : Machine noise to include machine being operated as well as other machines close by including Forklifts. Hazards : See Job Hazard Analysis.
3) Atmospheric conditions : Dust : Limited, Mist : Water, Odors : Dry wood, Gasses : None, Poor Ventilation : None.
The worker in this position will be standing on a slightly elevated wooden platform with rubber mats. The worker will move back and forth on this platform in front of an elevated dry conveyor measuring 3 ½ to 4’ above the ground. Personal Protective Equipment Required : (1) Eye Protection.
2) Hearing Protection. (3) Blue Atlas gloves.
4) Approved Footwear (5) High Visibility Clothing. Physical Demands : See the attached Job / Task Evaluation and Physical Capabilities portion; this position requires constant use of hearing and vision, frequent bending, twisting, pushing / pulling and reaching, and occasional lifting / carrying / pushing / pulling more than 50 lbs. Skills : Must be able to communicate effectively with Maintenance Director, lead millwright, electricians, production supervisors, machine operators, and cleanup via face-to-face meetings, radio, and telephone regarding troubleshooting, preventive maintenance, safety, etc.
Must be able to write legibly.
Vision / hearing / touch continuously; reading and speech required to communicate comprehension of Job Hazard Analysis, monthly safety training topics, and Job Certification if applicable.
Other skills include (but are not limited to) :
2) Always use our 14-step lockout / tagout procedure before doing any maintenance, clearing jams, or getting into machinery for any reason; be aware of stored energy.
3) Always use proper body mechanics (ex : don’t overreach, get help as needed to push loads out).
4) Use proper PPE (gloves, eye protection, hearing protection). (5) Be aware of and always communicate with your co-worker (ex : forklift driver).
6) Will be required to read and write during safety training. Employee Signature Employee Name (print) : Employee Signature : Date : Employer Representative Signature Supervisor Name (print) : Supervisor Signature : Date : Job Title : Millwright Employee Name : ENDURANCE Never / Not Required Seldom 1-5% Occasionally 6-33% Frequently 34-66% Continuous 67-100% Total hours at one time Total hours in a workday SITTING X STANDING X 2 12 WALKING X 2 12 CHANGE POSITIONS X PHYSICAL REQUIREMENTS : (Enter actual maximum weight in pounds in the box) LIFTING Never / Not Required Seldom 1-5% Occasionally 6-33% Frequently 34-66% Continuous 67-100% 1-10 LBS 10 LBS 11-20 LBS 20 LBS 21-50 LBS 50 LBS 51-75 LBS 75 LBS 76-100 LBS 100 LBS >
100 LBS >
100 LBS Maximum weight lifted by worker without assistance : 50 LBS If required, lifting over 50 LBS is performed with two or more people and / or lifting devices. CARRYING Never / Not Required Seldom 1-5% Occasionally 6-33% Frequently 34-66% Continuous 67-100% 1-10 LBS 10 LBS 11-20 LBS 20 LBS 21-50 LBS 50 LBS 51-75 LBS 75 LBS 76-100 LBS 100 LBS >
100 LBS 100 LBS Maximum weight carried by worker without assistance : 10-50 LBS If required, carrying over 50 LBS is performed with two or more people and / or lifting devices. PUSHING / PULLING FORCE TO BE EXCERTED Never / Not Required Seldom 1-5% Occasionally 6-33% Frequently 34-66% Continuous 67-100% 1-10 LBS
Salary : $33
