What are the responsibilities and job description for the Tech 2, Equipment Maintenance position at TechDigital Corporation?
Description:
Must have:
Very familiar with hydrolics
controls/sensors/vacuum/motors, etc.
Good with electronics
Understand what a server motor does and why it does what it does
Safety conscious
Temperature controllers - must know how they work
Sensor technologies
Hydraulics
Pneumatic cylinders (Flow conrols)
Basic math
Position Summary:
Reports directly to Engineering Manager / Maintenance Manager or reports to Production Supervisor. Performs routine set up, operation, minor and major routine maintenance, preventative maintenance (PM) and troubleshooting of highly complex/automated manufacturing equipment. Responsibilities include production, quality, downtime, and waste levels of machine operation. Perform mechanical, pneumatic and electrical maintenance (including preventive) repairs, adjustments, inspection and monitoring of production and/or facilities related equipment and machinery. Uses judgment and consultation to analyze, troubleshoot and repair complex equipment and machinery. Must project positive attitude with good team skills. Effectively works in a team setting, supporting team goals and objectives. Make effective decisions relative to position requirements. Uses judgment to plan, perform, make decisions, troubleshoot and problem solve in performance of all maintenance tasks.
Essential Roles & Responsibilities:
Performs routine set up, operation, minor and major routine maintenance, preventative maintenance (PM) and troubleshooting of highly complex/automated manufacturing equipment. Controls and adjusts machine settings.
Responsibilities include production, quality, downtime, and waste levels of machine operation. Perform mechanical, pneumatic, and electrical maintenance (including preventive) repairs, adjustments, inspection and monitoring of production and/or facilities related equipment and machinery.
Uses judgment to plan, perform, make decisions, fix and problem solve in performance of all maintenance tasks.
Prioritizes daily work assignments to meet production needs and department goals.
Responsible for preventive maintenance scheduling, completion of work orders and tasks as assigned.
Supports installation and removal of equipment, and performance of required corrective maintenance.
Consistent presence in production departments. Monitors the production lines and proactively evaluates equipment performance for repairs and continuous improvement.
Must demonstrate mechanical ability to complete changeover of equipment and some operator level preventive maintenance.
Assist with root-cause analysis activities for process or product exceptions.
Checks work using prescribed gauges, jig and fixtures to measure close tolerances.
Ensures accurate documentation of all relevant quality, safety, and maintenance documents.
To be done in conjunction with Engineering, Quality and Production supervision:
Organizes, complete, and directs improvement projects to increase equipment utilization.
Identifies, solves problems, and resolves complex issues associated with the machine performance and/or product quality.
Advises on proper content of PM task list and frequency of execution.
Assists with the installation, debug, and start-up of all new or modified production equipment.
Client Requirements:
Works with general supervision.
Works with external contractors and vendor as needed
Demonstrates the ability to follow established procedures according to Good Manufacturing Practices (GMP)
Must follow all Client housekeeping policies and procedures
Must follow all Client safety policies and procedures
Must be able to work overtime as required to meet Client business requirements
Performs other duties as assigned.
Qualifications
High School Diploma or GED & Certificate and 2 years of experience in relevant field
High School Diploma or GED with 4 years relevant experience required
Relevant Fields: Electrical / Electronics Technician, Electromechanical Technician, Mechanical Engineering Technician, Industrial Programmer, Electrician, Machine Builder / Repairer, Machinist, Refrigeration Mechanic, Welding Repairer
Knowledge/Basic Skills:
Time management skills required to ensure all tasks are completed without delay
Strong interpersonal and communication skills required to work with various teams
Mechanical, pneumatic, and electrical skills, must analyze, fix, and repair complex equipment and machinery.
Ability to read electrical and pneumatic schematics
Ability to read and interpret technical manuals, blueprints, diagrams, and equipment specifications.
Flexible and adaptable in working with/on a variety of equipment, processes, projects, or assignments.
Understanding and use of trades mathematics, calibration techniques, and precision measuring instruments essential.
Constant mental and visual attention performing moderately complex work requiring close limits of accuracy and tolerances.
Must be knowledgeable in the following areas
Use of a PC including MS Excel & MSWord.
Demonstrate mechanical proficiency
Demonstrate electrical proficiency
Demonstrate hydraulics, pneumatics proficiency
Ability to use multimeter
Sensor technology
Basic plumbing (fluid and pneumatic)
Power transmission (gear box, motors, belt and chain drives)
Basic machining
Electrical troubleshooting of circuits from low level signals up to 480 VAC.
Additional experience PREFERRED:
Troubleshooting of Industrial Control Systems (instrumentation, ladder logic, relay logic, VFD, servo etc.)
Demonstrated knowledge and proficiency of PLC operations, robotics, and vision systems.
Mechanical design (AutoCAD, Solidworks, etc.)
SAP maintenance module or equivalent computerized system
Basic skills in use of mill, lathe, welding, & bearing press
For certain roles at Client, employment is contingent upon the Company's receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with Client's Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.
Must have:
Very familiar with hydrolics
controls/sensors/vacuum/motors, etc.
Good with electronics
Understand what a server motor does and why it does what it does
Safety conscious
Temperature controllers - must know how they work
Sensor technologies
Hydraulics
Pneumatic cylinders (Flow conrols)
Basic math
Position Summary:
Reports directly to Engineering Manager / Maintenance Manager or reports to Production Supervisor. Performs routine set up, operation, minor and major routine maintenance, preventative maintenance (PM) and troubleshooting of highly complex/automated manufacturing equipment. Responsibilities include production, quality, downtime, and waste levels of machine operation. Perform mechanical, pneumatic and electrical maintenance (including preventive) repairs, adjustments, inspection and monitoring of production and/or facilities related equipment and machinery. Uses judgment and consultation to analyze, troubleshoot and repair complex equipment and machinery. Must project positive attitude with good team skills. Effectively works in a team setting, supporting team goals and objectives. Make effective decisions relative to position requirements. Uses judgment to plan, perform, make decisions, troubleshoot and problem solve in performance of all maintenance tasks.
Essential Roles & Responsibilities:
Performs routine set up, operation, minor and major routine maintenance, preventative maintenance (PM) and troubleshooting of highly complex/automated manufacturing equipment. Controls and adjusts machine settings.
Responsibilities include production, quality, downtime, and waste levels of machine operation. Perform mechanical, pneumatic, and electrical maintenance (including preventive) repairs, adjustments, inspection and monitoring of production and/or facilities related equipment and machinery.
Uses judgment to plan, perform, make decisions, fix and problem solve in performance of all maintenance tasks.
Prioritizes daily work assignments to meet production needs and department goals.
Responsible for preventive maintenance scheduling, completion of work orders and tasks as assigned.
Supports installation and removal of equipment, and performance of required corrective maintenance.
Consistent presence in production departments. Monitors the production lines and proactively evaluates equipment performance for repairs and continuous improvement.
Must demonstrate mechanical ability to complete changeover of equipment and some operator level preventive maintenance.
Assist with root-cause analysis activities for process or product exceptions.
Checks work using prescribed gauges, jig and fixtures to measure close tolerances.
Ensures accurate documentation of all relevant quality, safety, and maintenance documents.
To be done in conjunction with Engineering, Quality and Production supervision:
Organizes, complete, and directs improvement projects to increase equipment utilization.
Identifies, solves problems, and resolves complex issues associated with the machine performance and/or product quality.
Advises on proper content of PM task list and frequency of execution.
Assists with the installation, debug, and start-up of all new or modified production equipment.
Client Requirements:
Works with general supervision.
Works with external contractors and vendor as needed
Demonstrates the ability to follow established procedures according to Good Manufacturing Practices (GMP)
Must follow all Client housekeeping policies and procedures
Must follow all Client safety policies and procedures
Must be able to work overtime as required to meet Client business requirements
Performs other duties as assigned.
Qualifications
High School Diploma or GED & Certificate and 2 years of experience in relevant field
High School Diploma or GED with 4 years relevant experience required
Relevant Fields: Electrical / Electronics Technician, Electromechanical Technician, Mechanical Engineering Technician, Industrial Programmer, Electrician, Machine Builder / Repairer, Machinist, Refrigeration Mechanic, Welding Repairer
Knowledge/Basic Skills:
Time management skills required to ensure all tasks are completed without delay
Strong interpersonal and communication skills required to work with various teams
Mechanical, pneumatic, and electrical skills, must analyze, fix, and repair complex equipment and machinery.
Ability to read electrical and pneumatic schematics
Ability to read and interpret technical manuals, blueprints, diagrams, and equipment specifications.
Flexible and adaptable in working with/on a variety of equipment, processes, projects, or assignments.
Understanding and use of trades mathematics, calibration techniques, and precision measuring instruments essential.
Constant mental and visual attention performing moderately complex work requiring close limits of accuracy and tolerances.
Must be knowledgeable in the following areas
Use of a PC including MS Excel & MSWord.
Demonstrate mechanical proficiency
Demonstrate electrical proficiency
Demonstrate hydraulics, pneumatics proficiency
Ability to use multimeter
Sensor technology
Basic plumbing (fluid and pneumatic)
Power transmission (gear box, motors, belt and chain drives)
Basic machining
Electrical troubleshooting of circuits from low level signals up to 480 VAC.
Additional experience PREFERRED:
Troubleshooting of Industrial Control Systems (instrumentation, ladder logic, relay logic, VFD, servo etc.)
Demonstrated knowledge and proficiency of PLC operations, robotics, and vision systems.
Mechanical design (AutoCAD, Solidworks, etc.)
SAP maintenance module or equivalent computerized system
Basic skills in use of mill, lathe, welding, & bearing press
For certain roles at Client, employment is contingent upon the Company's receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with Client's Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law.
