What are the responsibilities and job description for the RF Communications Engineer position at TEKsystems?
*Description*
*Top Skills' Details*
1. 5 years' electronic maintenance in the following areas: Digital/analog signal processing, Communications equipment (VHF, UHF, microwave, fiber-optic), Digital computer systems; Test equipment, RF signal processing, Antennas, RF systems, Primary and secondary power equipment, Cisco TCP/IP networking equipment, CoT Software products
2. Ability to design, develop, test, and implement suitable RF and network architectures in accordance with applicable Department of Defense (DoD), United States Air Force (USAF), United States Special Operations Command (USSOCOM), Air Force Special Operations Command (AFSOC), industry guidance, and best practices.
3. Experience with the following: PRC-163/167, PRC-160, PRC-161, and PRC-117G.
-BA/BS or equivalent experience Plus at least 5 years providing critical RF transport and network engineering/administration services
-8570.01 IAT level II certification required: Sec CE as a minimum
-Must have a SECRET clearance
As a RF Communications Engineer you will work closely with coworkers, partners, stakeholders and customer representatives to create effective solutions, providing support to organizational Development & Engineering projects to deliver next-generation technologies across a wide-range of services and emerging capabilities.
Required:
oExperience with the following: PRC-163/167, PRC-160, PRC-161, and PRC-117G.
oFamiliar with using CPA (Harris radio programming application)
oKnowledge of IP networking.
oFamiliar with COMSEC use and controls
oSkilled at RF network analysis and research to identify capacity, performance, architecture, and support constraints and problems
oAbility Develop RF network engineering approaches and propose courses of action (COA) to the government
oAbility to assess current operational architectures and configurations to improve operational effectiveness, system performance, efficiency, information security, and configuration management
oExperience identifying and documenting applicable standards and best practices
oAbility to design, develop, test, and implement suitable RF and network architectures in accordance with applicable Department of Defense (DoD), United States Air Force (USAF), United States Special Operations Command (USSOCOM), Air Force Special Operations Command (AFSOC), industry guidance, and best practices.
* Specific experience with a majority of the following required:
oWearable area network, boundary, and external network interface architectures. This includes analyzing and developing standard unclassified and classified networks for AFSOC
oStandard air-to-air and air-to-ground RF network architectures and plans
oStandard terrestrial and wireless architectures
oStandard deployable terrestrial and RF C2 node architectures
oSoftware defined network for aircraft, ground vehicles, and C2 nodes
*Must be able to effectively conduct and interpret tests, and troubleshoot solutions
*Ability to work on multiple projects simultaneously
*Ability to create and maintain systems related documentation
*Solid written and verbal communication skills
*Skills*
Rf engineering, Radio frequency, Wireless network, Radio, Wireless, cisco routers, Telecommunication, RF
*Top Skills Details*
Rf engineering,Radio frequency,Wireless network,Radio,Wireless,cisco routers
*Additional Skills & Qualifications*
*Follow and implement Department of Defense (DoD), Defense Information Systems Agency (DISA), Committee on National Security Systems (CNSS), National Security Agency (NSA), National Institute of Standards and Technology (NIST), and other applicable security guidance
*Identify, validate, assess RF networking shortfalls across multiple platforms
*Develop measurable test and success criteria
*Support testing to measure against success criteria
*Document and brief actions and test results in post assessment reviews
*Develop Plans of Instructions and Checklists for Operational use
*Provide user training as needed to ensure capability integration
*Collaborate with teammates on complex problems, and recommend improvements
*Assist with deconstruction and interpretation of requirements supporting projects
*Adhere to standards, policies, protocols, procedures and best practices that truly embody a "Best of Breed" Development & Engineer services delivery team
*Participate in architectural and design discussions as they pertain to Future State, Concepts, and planned or active Development & Engineering projects
*Participating in strategic engagements and events, as required
o Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:
* Medical, dental & vision
* Critical Illness, Accident, and Hospital
* 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available
* Life Insurance (Voluntary Life & AD&D for the employee and dependents)
* Short and long-term disability
* Health Spending Account (HSA)
* Transportation benefits
* Employee Assistance Program
* Time Off/Leave (PTO, Vacation or Sick Leave)
*Experience Level*
Intermediate Level
*Pay and Benefits*
The pay range for this position is $40.00 - $60.00/hr.
Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:
* Medical, dental & vision
* Critical Illness, Accident, and Hospital
* 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available
* Life Insurance (Voluntary Life & AD&D for the employee and dependents)
* Short and long-term disability
* Health Spending Account (HSA)
* Transportation benefits
* Employee Assistance Program
* Time Off/Leave (PTO, Vacation or Sick Leave)
*Workplace Type*
This is a fully onsite position in Fort Walton Beach,FL.
*Application Deadline*
This position is anticipated to close on Apr 7, 2025.
About TEKsystems:
We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
*Top Skills' Details*
1. 5 years' electronic maintenance in the following areas: Digital/analog signal processing, Communications equipment (VHF, UHF, microwave, fiber-optic), Digital computer systems; Test equipment, RF signal processing, Antennas, RF systems, Primary and secondary power equipment, Cisco TCP/IP networking equipment, CoT Software products
2. Ability to design, develop, test, and implement suitable RF and network architectures in accordance with applicable Department of Defense (DoD), United States Air Force (USAF), United States Special Operations Command (USSOCOM), Air Force Special Operations Command (AFSOC), industry guidance, and best practices.
3. Experience with the following: PRC-163/167, PRC-160, PRC-161, and PRC-117G.
-BA/BS or equivalent experience Plus at least 5 years providing critical RF transport and network engineering/administration services
-8570.01 IAT level II certification required: Sec CE as a minimum
-Must have a SECRET clearance
As a RF Communications Engineer you will work closely with coworkers, partners, stakeholders and customer representatives to create effective solutions, providing support to organizational Development & Engineering projects to deliver next-generation technologies across a wide-range of services and emerging capabilities.
Required:
oExperience with the following: PRC-163/167, PRC-160, PRC-161, and PRC-117G.
oFamiliar with using CPA (Harris radio programming application)
oKnowledge of IP networking.
oFamiliar with COMSEC use and controls
oSkilled at RF network analysis and research to identify capacity, performance, architecture, and support constraints and problems
oAbility Develop RF network engineering approaches and propose courses of action (COA) to the government
oAbility to assess current operational architectures and configurations to improve operational effectiveness, system performance, efficiency, information security, and configuration management
oExperience identifying and documenting applicable standards and best practices
oAbility to design, develop, test, and implement suitable RF and network architectures in accordance with applicable Department of Defense (DoD), United States Air Force (USAF), United States Special Operations Command (USSOCOM), Air Force Special Operations Command (AFSOC), industry guidance, and best practices.
* Specific experience with a majority of the following required:
oWearable area network, boundary, and external network interface architectures. This includes analyzing and developing standard unclassified and classified networks for AFSOC
oStandard air-to-air and air-to-ground RF network architectures and plans
oStandard terrestrial and wireless architectures
oStandard deployable terrestrial and RF C2 node architectures
oSoftware defined network for aircraft, ground vehicles, and C2 nodes
*Must be able to effectively conduct and interpret tests, and troubleshoot solutions
*Ability to work on multiple projects simultaneously
*Ability to create and maintain systems related documentation
*Solid written and verbal communication skills
*Skills*
Rf engineering, Radio frequency, Wireless network, Radio, Wireless, cisco routers, Telecommunication, RF
*Top Skills Details*
Rf engineering,Radio frequency,Wireless network,Radio,Wireless,cisco routers
*Additional Skills & Qualifications*
*Follow and implement Department of Defense (DoD), Defense Information Systems Agency (DISA), Committee on National Security Systems (CNSS), National Security Agency (NSA), National Institute of Standards and Technology (NIST), and other applicable security guidance
*Identify, validate, assess RF networking shortfalls across multiple platforms
*Develop measurable test and success criteria
*Support testing to measure against success criteria
*Document and brief actions and test results in post assessment reviews
*Develop Plans of Instructions and Checklists for Operational use
*Provide user training as needed to ensure capability integration
*Collaborate with teammates on complex problems, and recommend improvements
*Assist with deconstruction and interpretation of requirements supporting projects
*Adhere to standards, policies, protocols, procedures and best practices that truly embody a "Best of Breed" Development & Engineer services delivery team
*Participate in architectural and design discussions as they pertain to Future State, Concepts, and planned or active Development & Engineering projects
*Participating in strategic engagements and events, as required
o Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:
* Medical, dental & vision
* Critical Illness, Accident, and Hospital
* 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available
* Life Insurance (Voluntary Life & AD&D for the employee and dependents)
* Short and long-term disability
* Health Spending Account (HSA)
* Transportation benefits
* Employee Assistance Program
* Time Off/Leave (PTO, Vacation or Sick Leave)
*Experience Level*
Intermediate Level
*Pay and Benefits*
The pay range for this position is $40.00 - $60.00/hr.
Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:
* Medical, dental & vision
* Critical Illness, Accident, and Hospital
* 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available
* Life Insurance (Voluntary Life & AD&D for the employee and dependents)
* Short and long-term disability
* Health Spending Account (HSA)
* Transportation benefits
* Employee Assistance Program
* Time Off/Leave (PTO, Vacation or Sick Leave)
*Workplace Type*
This is a fully onsite position in Fort Walton Beach,FL.
*Application Deadline*
This position is anticipated to close on Apr 7, 2025.
About TEKsystems:
We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Salary : $40 - $60
