Demo

Sheet metal mechanic

CultureStaff
Phoenix, AZ Full Time
POSTED ON 12/13/2024
AVAILABLE BEFORE 2/17/2025

Duties and Responsibilities : Include the following; other duties may be assigned.

  • Prepare and operate Press Brakes, Single Stroke punch presses, multi-station drill machines, saws, notchers, air powered grinders, drill motors, and hand tools to fabricate straighten and adjust detail parts and complex assemblies per drawing and work instructions for that operation.
  • Observe machine or process operation and measure parts in accordance with instructions using defined inspection media.
  • Stops machine or process and notifies supervisor when the parts do not conform to specifications.
  • Adjust machine and tool settings under minimal supervision to obtain specified results
  • Perform work in all areas of shop as designated by supervision on an as needed basis.
  • Maintain a clean work area following 5S methodologies.

Education and Experience : To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

The requirements listed below are representative of the knowledge, skill, and / or ability required.

  • High School diploma or GED; 0-2 years of demonstrated experience for Level 1 SMB Operator, 2-5 years of demonstrated experience for Level 2 SMB Operator, 5 or more years of demonstrated experience for Level 3 SMB Operator.
  • Acceptable interpretation of drawings and work orders as demonstrated at job interview.
  • Minimum vision requirements : Near and far vision of 20 / 30 in both eyes (corrected)
  • Manual dexterity to handle small delicate parts and hand held standard measuring equipment at the same time.

Sheet Metal Bench Operator

Experience

Expected Specialized Training

Knowledge, Skills, and Abilities

Level 1

Demonstrates the experience of 0-2 years in a position or specialization

  • Height gage
  • Digital Calipers
  • Pi tape
  • Micrometers
  • Polishing / DeBurr
  • Bench Grinder
  • Bead Blaster
  • Disc Sander
  • Belt Sander
  • Entry level position with little or no prior relevant work experience
  • Acquires basic skills to perform routine entry level operator tasks to operate
  • Work is prescribed and completed with little autonomy
  • Works with either close supervision or under clearly defined procedures

Level 2

All Level 1 specialized training in addition to :

  • Kick Press
  • Arbor Press
  • Omera
  • Stripit
  • Auto Roller
  • Hand Roller
  • Rivet Machine
  • Has developed knowledge and skills through training or considerable work experience
  • Works within established procedures with a moderate degree of supervision
  • Identifies the problem and all relevant issues in straightforward situations, assesses each using standard procedures, and makes sound decisions.
  • Must be capable of running the majority of jobs in the department.

Level 3

Demonstrates 5 or more years of experience in position or specialization

All level 1 and 2 specialized training in addition to :

  • Expander
  • Notcher
  • Lg Press Brake
  • Sm Press Brake
  • Milling Machine
  • Rivet Machine
  • Whiting Roll
  • Has developed specialized skills or is multi-skilled through job-related training and considerable on-the-job experience
  • Completes work with a limited degree of supervision
  • Likely to act as an informal resource for training new department operators.
  • Must be capable of running all jobs in the department.

Physical Demands : The physical demands described here are representative of those that must be met by an employee successfully perform essential functions of this job with or without reasonable accommodation.

While performing the duties of this job, the employee is regularly required to talk, hear, sit, use hands to finer, handle or feel.

The employee is frequently required to reach with hands and arms, walk, sit, stoop, kneel, crouch, or crawl.

  • The employee is occasionally exposed to fumes or airborne particles, toxic, or caustic chemicals.
  • The noise level in the work environment is usually moderate.
  • Must be able to lift and or move up to 50lbs.
  • Ability to drive and operate a Forklift.
  • Last updated : 2024-11-18

If your compensation planning software is too rigid to deploy winning incentive strategies, it’s time to find an adaptable solution. Compensation Planning
Enhance your organization's compensation strategy with salary data sets that HR and team managers can use to pay your staff right. Surveys & Data Sets

What is the career path for a Sheet metal mechanic?

Sign up to receive alerts about other jobs on the Sheet metal mechanic career path by checking the boxes next to the positions that interest you.
Income Estimation: 
$46,351 - $61,722
Income Estimation: 
$53,120 - $69,174
Income Estimation: 
$50,113 - $64,377
Income Estimation: 
$61,656 - $78,069
Income Estimation: 
$59,875 - $77,824
Income Estimation: 
$91,138 - $115,157
Income Estimation: 
$112,499 - $156,869
Income Estimation: 
$48,232 - $59,817
Income Estimation: 
$83,358 - $103,871
Income Estimation: 
$71,548 - $88,918
Income Estimation: 
$63,993 - $81,891
Income Estimation: 
$76,263 - $101,711
Income Estimation: 
$37,783 - $51,539
Income Estimation: 
$53,120 - $69,174
Income Estimation: 
$50,113 - $64,377
Income Estimation: 
$61,656 - $78,069
Income Estimation: 
$59,875 - $77,824
Income Estimation: 
$38,924 - $44,410
Income Estimation: 
$51,902 - $64,610
Income Estimation: 
$46,685 - $59,878
Income Estimation: 
$43,603 - $55,670
Income Estimation: 
$51,669 - $66,452
View Core, Job Family, and Industry Job Skills and Competency Data for more than 15,000 Job Titles Skills Library

Not the job you're looking for? Here are some other Sheet metal mechanic jobs in the Phoenix, AZ area that may be a better fit.

2nd shift Sheet Metal Mechanic

JCO Workforce Solutions, Phoenix, AZ

Area Superintendent - Sheet Metal

ACCO Engineered Systems, Phoenix, AZ

AI Assistant is available now!

Feel free to start your new journey!