What are the responsibilities and job description for the Machine Maintenance Technician position at PlayPower?
Description
POSITION DESCRIPTION
SUMMARY:
ESSENTIAL DUTIES AND RESPONSIBILITIES:
QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals to perform the essential functions.
EDUCATION AND/OR EXPERIENCE:
LANGUAGE SKILLS:
REASONING ABILITY:
OTHER SKILLS AND ABILITIES:
ATTENDANCE REQUIREMENT:
ALL SAFETY REQUIREMENTS:
ABSENCE OF DIRECT THREAT REQUIREMENT:
SAFETY COMPLIANCE REQUIREMENT:
PHYSICAL DEMANDS:
SITTING
O
CARRYING
STANDING
F
Light - 0-10 lbs.
F
WALKING
Medium - 10-25 lbs.
F
DRIVING
O
Heavy - 25-50 lbs.
F
Very Heavy - 50 lbs.
O
SWEEPING
F
JUMPING/JARRING
O
LIFTING
TWISTING
F
Sedentary - 0-10 lbs.
F
CRAWLING
O
Light - 10-20 lbs.
F
Medium - 20-50 lbs.
F
SHOVELING
O
Heavy - 50-100 lbs.
0
CLIMBING
F
Very Heavy - 100
0
BALANCE
F
LIFTING ALONE
F
STOOPING/BENDING
F
TEAM LIFTING
0
KNEELING
F
PULLING (50 lbs)
0
REACHING
F
PUSHING (50 lbs)
0
REPETITIVE MOVEMENTS
F
GRIPPING W/ WRIST MOTION
F
OPERATE MACHINERY (LIST)
F
HAND TOOLS
F
Drill:
F
PAPER WORK
F
CHEMICAL USE
O
WRITING/DATA ENTRY
F
HAZARDOUS MATERIALS
O
INSTALLING
F
WORK CONDITIONS
Dry: x
Wet:
Hot X
Heights: F
SAFETY EQUIPMENT: Must Comply with required PPE
Safety Shoes:
Respirator:
O
Safety Glasses:
C
Hard Hat:
O
Ear Protection:
C
Gloves:
F
Welding Helmet
O
POSITION DESCRIPTION
MACHINE MAINTENANCE (Multiple Shift Options Available)
SUMMARY:
Facilitate the upkeep, continuous improvement and repair of machines. Troubleshoot operations problems, monitor the operation of machinery and equipment, perform routine maintenance on equipment and determine when and what kind of maintenance is needed. Maintain a clean and safe work environment at all times. Employee must be able to work any of three shifts as needed.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
- Clean machines and machine parts, using solvents, cloths, air guns, hoses, vacuums
- Dismantle machines and remove parts for repair, using hand tools, chain falls, jacks, hoists
- Inspect or test damaged machine parts, and mark defective areas
- Install, replace or change machine parts and attachments, according to production specifications
- Lubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified procedures
- Reassemble machine after the completion of repair or maintenance work
- Remove hardened material from machines or machine parts, place or replace metal, wood, leather, glass, or other lining in machines
- Start machines and observe mechanical operation to determine efficiency and to detect problems
- Collect and discard worn machine parts and other refuse in order to maintain machinery and work areas
- Inventory and requisition machine parts, equipment, and other supplies
- Measure, mix, prepare and test chemical solutions used to clean or repair machinery
- Record productions, repair, and machine maintenance information in both written and electronic format as required.
- Set up and operate machines, and adjust controls to regulate operations
- Determine causes of operating errors and decide what action to take
- Watching gauges, dials or other indicators to make sure machine is functioning properly
- Electrical and electrical type of work along with troubleshooting of electrical controls.
- Regular attendance.
QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals to perform the essential functions.
EDUCATION AND/OR EXPERIENCE:
- High School Diploma or General Education Degree (GED)
- One year experience required in an industrial maintenance position/2-3 years preferred
LANGUAGE SKILLS:
- Must be able to read, speak and write English
REASONING ABILITY:
- Ability to carry out instructions furnished in written, verbal or electronic form
- Ability to read and interpret technical documents, safety rules and other correspondence.
- Ability to count and measure equipment
OTHER SKILLS AND ABILITIES:
- Ability to add, subtract, multiply and divide using basic math skills.
- Basic electrical skills required
- Knowledge of chemicals
ATTENDANCE REQUIREMENT:
Must be available and willing to work overtime hours as the employer determines is necessary or desirable to meet its business needs. Must be available and willing to work such weekends and/or holidays as the employer determines are necessary or desirable to meet its business needs.
ALL SAFETY REQUIREMENTS:
ABSENCE OF DIRECT THREAT REQUIREMENT:
Must not pose a direct threat or significant risk of substantial harm to the safety or health of himself/herself or others.
SAFETY COMPLIANCE REQUIREMENT:
Must be committed to a high standard of safety and be willing and able to comply with all safety laws and all of the employer’s safety policies and rules and must be willing to report safety violations and potential safety violations to appropriate supervisory or management personnel.
PHYSICAL DEMANDS:
C = Continuously F=Frequently O= Occasionally N = Never
SITTING
O
CARRYING
STANDING
F
Light - 0-10 lbs.
F
WALKING
F
Medium - 10-25 lbs.
F
DRIVING
O
Heavy - 25-50 lbs.
F
Very Heavy - 50 lbs.
O
SWEEPING
F
JUMPING/JARRING
O
LIFTING
TWISTING
F
Sedentary - 0-10 lbs.
F
CRAWLING
O
Light - 10-20 lbs.
F
Medium - 20-50 lbs.
F
SHOVELING
O
Heavy - 50-100 lbs.
0
CLIMBING
F
Very Heavy - 100
0
BALANCE
F
LIFTING ALONE
F
STOOPING/BENDING
F
TEAM LIFTING
0
KNEELING
F
PULLING (50 lbs)
0
REACHING
F
PUSHING (50 lbs)
0
REPETITIVE MOVEMENTS
F
GRIPPING W/ WRIST MOTION
F
OPERATE MACHINERY (LIST)
F
HAND TOOLS
F
Drill:
OVERHEAD ACTIVITIES
F
PAPER WORK
F
CHEMICAL USE
O
WRITING/DATA ENTRY
F
HAZARDOUS MATERIALS
O
INSTALLING
F
WORK CONDITIONS
Dry: x
Wet:
Hot X
Heights: F
SAFETY EQUIPMENT: Must Comply with required PPE
Safety Shoes:
C
Respirator:
O
Safety Glasses:
C
Hard Hat:
O
Ear Protection:
C
Gloves:
F
Welding Helmet
O
Service Coordinator
Machine Maintenance Inc -
Springfield, MO
Parts Coordinator
Machine Maintenance Inc -
Springfield, MO
Maintenance - Maintenance Technician
Jasper Holdings Inc. -
Springs, MO
