Operations Associate II Jackson

Description

Summary 

The Carlstar Group Operations Associate ll is an hourly position responsible for continuous performance according to assigned job specifications. The successful candidate will be committed to safety, good housekeeping, and a willingness to learn. Operations Associate ll employees can be trained and assigned to any of the roles of the below listed jobs at the manufacturing plant, and often will rotate between the different jobs as business needs dictate - 3&4 Calendar Support, Bead Winder, Radial Apex, Radial Cap Slit, SP Assembler, SP Splicer, SP Molder, Bias Cutter 

DUTIES AND RESPONSIBILITIES: 3&4 Calendar Support 

Operate stock feeder and adjust feed to match out feed to maintain a uniform bank on the mill or extruder. 
Identify and explain the different types of stock. 
Knowledge of how to start a band of rubber around the mill roll. 
Ability to adjust mill roll gap and explains the purpose for doing it. 
Ability to safely cut rubber on mill and slab off. 
 Provide a consistent and continuous feed strip to the calendar. 
Demonstrate and explain proper way to record and dispose of scrap and rework. 
Knowledge of how-to setup the calendar and adjust it to produce product within specifications. 
DUTIES AND RESPONSIBILITIES: Bead Winder 

Perform required quality checks (weight, length, splice verification, width, angle, thickness) 
 Check specifications in the computer and record the card the information and initials.  
 Ability to stand at station and splice the fabric together. Fabric is cut according to specifications for the desired catalog number. 
 Ability to take off and place on fabric rack using hoist. 
 Demonstrate ability to put new fabric on conveyor belt and begin splicing. Splice rubber coming into basin of machine. 
 Produce quality bead. 
 Set up, operate, and repair bead machines based on Standard Work Procedures. 
 Make bead wire spools.  
Track inventory of in-process materials. 
DUTIES AND RESPONSIBILITIES: Radial Apex 

Perform required quality checks (width, length, and splice quality) 
Check specifications on the beehive. 
Stand and move around at workstation to make apexed beads. 
Operator and monitor extruder 
Thread festoon with material, set up and operate apexer per specifications. 
Ability to make necessary adjustments to Apexing unit to meet quality requirements. 
Safely operates Apexing unit per Standard Work 
 Produce quality beads in a timely and safe manner according to Standard Work Procedure 
Set up and operate Extruder and apexing stations. 
Track inventory of in-process materials 
DUTIES AND RESPONSIBILITIES: Radial Cap Slit 

Successfully and safely operate the slitter per Standard Work Procedures 
Perform required quality checks (length, splice verification, width, thickness) 
Demonstrates the ability to check specifications in the computer and record. 
Ability to stand at station and splice the fabric together. 
Cut according to specifications. 
Take off and place on mother fabric rolls. 
Thread windup with fabric, start bobbins and remove when completed. 
Demonstrates ability to make splices and repair splices as necessary. 
Ability to make necessary adjustments to Slitter unit to meet quality requirements. 
Track inventory of in-process materials 
DUTIES AND RESPONSIBILITIES: SP Assembler 

Assemble semi-pneumatic tires, understand Bom’s, and other duties as assigned. 
Understands how to operate all stations within the assembly process. 
inspect tires to identify defects and scrap and package tires. 
Use tools safely and efficiently (i.e. torque gun) 
Detect and report faulty operation, defective, and/or unusual material condition. 
DUTIES AND RESPONSIBILITIES: SP Splicer 

Perform required quality checks such as weight, length, and splice verification. 
Understand the SWl for the extruder, splicer, and hot knife splicer, other duties as necessary. 
Learn the unique positioning of each extrusion (stage parts right side up or right side down for shrinking) to allow the molding operator to load correctly. 
Setup splicer and hot-knife splicer (changing clamps, add spacers, determine the stroke length) 
Adjust splicer and hot-knife splicer to meet quality requirements for splicing. 
Understand the information on data collection sheets and the hot-knife lengths sheets to setup and run the splicer and hot-knife operation. 
DUTIES AND RESPONSIBILITIES: SP Molder 

Assemble product using various types of equipment. 
Operate machine components safely and efficiently. 
Understand components should be used for each process according to Standard Work Procedure 
lnspect product to identify defects and scrap. 
Use tools safely and efficiently. 
Read and understand build specifications required for successful operation of machinery. 
Detect and report faulty operation, defective, and/or unusual material conditions. 
DUTIES AND RESPONSIBILITIES: Bias Cutter 

Safely and effectively operate bias cutter according to Standard Work Procedure 
Perform required quality checks (weight, length, splice verification, width, angle, thickness) 
Check specifications and enter data appropriately in computer. 
Ability to stand stationary at bias cutter machine for long periods of time. 
Ability to use hoist to take off and place on fabric rack. 
Ability to adjust bias cutter to meet quality requirements. 

Qualifications

ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT:

All Operations Associate II Employees To perform the essential functions of this job, reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.  

The employee should possess the ability to: 

• Work safely around continuously moving mechanical parts. 
•  Work in a hot environment while meeting production rates.  
• Be exposed to a noisy environment and comfortable with PPE requirements.  
• Maintain regular attendance and punctuality for 8–12-hour shifts. 
• Be comfortable standing, stooping, bending, kneeling, walking, leaning, and working around rotating equipment.  
• Be comfortable lifting up to 50 lbs.   
• Ability to push/pull 5O-150 lbs. on a wheeled cart; static push/pull:20lbs.  
• Ability to stoop, stand, squat, and move at a continuous pace for 8 hours/day. 
•  Pinch minimum 6 lbs.  
• Grasp minimum 35 lbs.  
•  A full range of motion required: cervical, shoulders, elbow, wrist, fingers, hands, truck twist, and feet.  
•  Working Conditions: moderate noise, moving mechanical parts, static shock, burns, go up heights, odors, dust, protrusions, narrow access, good vision, and hearing. 
•  Any lifting over 70 lbs. must be completed with assistance through mechanical or individual support.  
• Certain positions require forklift certification. 

Other job duties will be required, as needed, to be performed by the employees in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.   Employees often cover other jobs and may be assigned other functions outside the job role to support the continuation of the operation of the Jackson Plant facility.