Job Summary:

Perform daily activities of CNC Mill and Lathe machine setups including 3, 4, and 5 axis machines, recommend and select cutting tools, training Level I & II machinist to run parts and to solve non-conformance and/or near tolerance limit conditions as notified.

Essential Duties, Responsibilities, Competency and Qualifications:

To perform this job successfully, an individual must be able to perform each Essential Duty and Responsibility, Competency, and Qualification satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or physical ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Duties, Responsibilities, and Success Factors:

• Modify programs, adjust (tool offsets, etc.) to new and established job files.
• Set-up CNC Mills and Lathes with 1st article inspection. Includes boring jaws, reviewing and verifying program and blueprints, ability to maintain close tolerances (withing .0005”) and install and indicate all tools accurately, indicate fixtures and make offsets, and tool offsets. Use of Marposs probing, Co-Bots and 3 D Printing
• Verification of parts by measuring, first-run part, and sample work pieces; AS9100 experience required.
• Reads and interprets blueprints, planning sheets, sketches, and related technical data to determine operating procedures and have knowledge of the manufacturing sequences and machining methods required.
• Operate equipment at a rate that equals or exceeds quality and efficiency standards as noted on the traveler keeping up with KPI’s. Knowledge of CNC Mills and CNC Lathes.
• Monitor cutting tools in machine spindle and notifies shop floor manager/foreman of tool wear and/or tolerance problems
• Starts machine and monitors display and machine operation to detect malfunction
• Change cutting tool and adjust coolant direction according to required machining sequence or to measure for conformance to blueprint specifications, using precision measuring instruments
• Notifies shop floor manager/shop foreman of any potential machine or tool problems and malfunctions or out-of-tolerance machining. Cleans machine tools and parts
• Communicate and interpret technical instructions in mathematical or diagram form. Communicate effectively with team members and shop floor manager/shop foreman to problem solve, instruct, and coordinate activities
• Responsible for proper use, operation and care of all tools, tooling, and inspection equipment. Must adhere to company policy and procedures.
• Through inspection (visual and mechanical) of parts as specified by Inspection Plan and/or Blueprint.
• Other duties as assigned.

Competency and Qualifications:

To perform the job successfully, an individual should demonstrate the following competencies:

• Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions.
• Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Presents numerical data effectively; Able to read and interpret written information. Notate changes on the traveler as to the running of each job. Accurately update production schedule hourly.
• Adaptability - Adapts to changes in the work environment; Manages competing demands; Able to deal with frequent change, delays, or unexpected events.
• Attendance/Punctuality – Is consistently at work on time; Ensures proper requests are completed and approved when absent.
• Dependability – Self Starter that follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long or extended hours when necessary to reach goals; Completes tasks on time and request help as needed.
• Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources.
• Quality/Quantity – Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Meets standards; Completes work efficiently and timely. Strives to increase productivity and work effectively.
• Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly.

Qualifications:

• Knowledge of HAAS and Doosan mill and lathes
• 3-5 years’ experience setup and operating CNC mills/lathes
• Skilled use of Feeds and Speeds
• Strong math skills including geometry and precise part counts
• Strong Knowledge of blueprint planning sheets and inspection tools
• Organizational skills with a strong attention to detail
• Self-Starter with the ability to multitask, prioritize, and carry out daily work assignments
• Fluent in English with the ability to communicate technical instructions.
• Gibbs CAM a plus

Education/Experience:

High school diploma or general education degree (GED)

Exceptional in math (Algebra, geometry, and some trigonometry)

Language Ability:

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write detailed technical instructions.

Math Ability:

Strong math skills add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Experience with Geometry and Trigonometry

Reasoning Ability:

Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

Computer Skills:

Basic computer skills/knowledge required.

Certificates and Licenses:

No certifications needed

Supervisory Responsibilities:

This job is supervising Level I and II machinists for training and support.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly exposed to work near moving mechanical parts. The employee is frequently exposed to wet or humid conditions (non-weather). The employee is occasionally exposed to vibration. The noise level in the work environment is usually moderate.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The employee must frequently lift and/or move up to 50 pounds while using the provided back support for safety. Specific vision abilities required by this job include close vision. While performing the duties of this Job, the employee is regularly required to stand, bend or twist; use hands to finger, handle, or feel; reach with hands and arms and talk and hear. The employee is frequently required to stand, walk, squat, kneel, crouch, or crawl.

Job Type: Full-time

Pay: $30.00 - $33.00 per hour

Expected hours: 40 per week

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Vision insurance

Schedule:

• 8 hour shift
• Monday to Friday

Experience:

• CNC milling machine: 5 years (Required)
• CNC lathe: 5 years (Required)

Work Location: In person