1 CMM Technician - Layout Inspector Job in Milwaukee, WI
SORT BY
Q
CMM Technician - Layout Inspector
$51k-67k (estimate)
Full Time
4 Days Ago
Quality Calibration Service is Hiring a CMM Technician - Layout Inspector Near Milwaukee, WI
Job DescriptionJob Location(s): New Berlin, WI
Employment Term: Regular
Employment Type Full Time or Part -Time
Hours per Week: 40
Work Hours (i.e. shift): 7::30AM -4:00 PM
Start Date: Immediate
Starting Salary Range: $18 - $25/Hr. depending on qualifications
Required Education: High School Diploma or Equivalent, 1-2 years of Technical Schooling a Plus
Experience: 1 to 3 years preferred. Will train qualified candidates (see qualifications required below)
Job Description:Read and interpret customer provided part prints taking geometric dimensioning and tolerances into consideration to plan a proper layout inspection using Touch Probe and Video Coordinate Measuring Machines. Create automated and or manual measuring programs as applicable on the contact and non-contact CMM’s. Create data reports of measurement results for customer/Engineering analysis. Measurements gathered may be for Full 1st Article (ISIR), PPAP’s, Highlighted Dimensions, or Process Capability Study inspections. Also perform scanning and digitizing of parts and profile analysis to CAD and other file types. Interact with customer contacts (Engineers) as required to establish proper plan for measuring parts to customer requirements or review and interpretation of results. The ideal candidate will be experienced in operating and programming DCC and Manual CMM'S
Because we are a specialty inspection service, work is varied, interesting and not routine as found in many manufacturing areas.
Job Duties (include but not limited to):
QCS has one of the broadest scopes of Accreditation of any lab in the country while maintaining one of the finest reputations in the industry for nearly 40 years. QCS has one of the finest Metrology facilities in the country containing 6 state of the art climate & environmentally controlled laboratories situated within our 20K sq. ft building providing an extremely pleasurable working environment.
QCS is an ISO/IEC 17025 Accredited full service metrology lab established in 1984 that provides calibration services to the Aerospace, Automotive, Defense, Medical, Nuclear, and all other General, Manufacturing sectors. QCS calibrates Hard Gages (i.e. Gage Blocks, Cylindrical and Threaded - Plugs, Rings, & Pins, etc.), QCS also performs calibration and repair of Electro-Mechanical Gage Hand Tools (i.e. Micrometers, Calipers, Indicators, Torque, Force, Pressure, Height Gages, Mass, etc.), Electronic Test & Measurement Equipment (Oscilloscopes, Multi-meters, Frequency Counters, Signal Generators, Hypots,etc.).OCS offers on-site services for the calibration of CMM’s, Hand Tools, Surface Plates, Optical Comparators, Hardness Testers, Electronic Instrumentation, and more. In addition QCS provides 1st Article Dimensional Inspection Services utilizing our touch probe and Video CMM’s) QCS has one of the broadest scopes of Accreditation of any lab in the country while maintaining one of the finest reputations in the industry for nearly 40 years. QCS has one of the finest Metrology facilities in the country containing 6 state of the art climate & environmentally controlled laboratories situated within our 20K sq. ft building providing an extremely pleasurable working environment.
Employment Term: Regular
Employment Type Full Time or Part -Time
Hours per Week: 40
Work Hours (i.e. shift): 7::30AM -4:00 PM
Start Date: Immediate
Starting Salary Range: $18 - $25/Hr. depending on qualifications
Required Education: High School Diploma or Equivalent, 1-2 years of Technical Schooling a Plus
Experience: 1 to 3 years preferred. Will train qualified candidates (see qualifications required below)
Job Description:Read and interpret customer provided part prints taking geometric dimensioning and tolerances into consideration to plan a proper layout inspection using Touch Probe and Video Coordinate Measuring Machines. Create automated and or manual measuring programs as applicable on the contact and non-contact CMM’s. Create data reports of measurement results for customer/Engineering analysis. Measurements gathered may be for Full 1st Article (ISIR), PPAP’s, Highlighted Dimensions, or Process Capability Study inspections. Also perform scanning and digitizing of parts and profile analysis to CAD and other file types. Interact with customer contacts (Engineers) as required to establish proper plan for measuring parts to customer requirements or review and interpretation of results. The ideal candidate will be experienced in operating and programming DCC and Manual CMM'S
Because we are a specialty inspection service, work is varied, interesting and not routine as found in many manufacturing areas.
Job Duties (include but not limited to):
- Program and operate the measuring machine(s) (CMM) to measure the surface area of three-dimensional objects for the inspection phase in the manufacturing process. In this position the CMM programmer will interpret blueprints and programs and ensure the CMM takes accurate measurements.
- Writes part inspection programs and develops part fixturing methods for CMM and other inspection equipment such as vision inspection equipment.
- Reads and interprets part prints/drawings and job orders for all product specifications, i.e., dimensions, tolerances, inspection, and other specific instructions.
- Interprets and understands geometric dimensioning and tolerance (GD&T) callouts from customer drawings, and translates it into inspection programs, to ensure manufactured products meet customer dimensional specifications.
- Measures dimensions of parts as specified to ensure conformance to specifications, using CMM & other automated inspection equipment as well as precision measuring instruments, templates, and fixtures.
- Assists with statistical studies including gage R&Rs, process capability studies.
- Participates in continuous improvement activities to improve process and product quality and efficiency including CMM inspection methods.
- Other duties as assigned.
- 2-5 Years minimum Experience Running and programming Coordinate Measuring Machines
- 2 -5 Years Minimum Part Layout Experience
- Experience and educated in Reading and Interpreting Part Drawings (Blue Prints)
- Thoroughly experienced and educated in Geometric Dimensioning and Tolerancing
- Must be capable of working effectively individually or in a team environment.
- 2 year technical school degree or equivalent level of education and/or work experience in a Quality or manufacturing discipline where CMM’s were used.
- Must be able to follow verbal and written instruction.
- Good Math Skills
- Must possess initiative and self motivation.
- Ability to obtain and maintain accurate records & certifications.
- Strong computer skills
- Ability to work with data bases and know how to properly store and retrieve data
- Good Mechanical Aptitude
- Good Troubleshooting skills
- Must have good communication skills and a professional appearance due to interface with customers.
- Health Insurance
- Dental Insurance
- 401K Plan
- Paid Vacation
- Vision Insurance
- Paid Holidays
QCS has one of the broadest scopes of Accreditation of any lab in the country while maintaining one of the finest reputations in the industry for nearly 40 years. QCS has one of the finest Metrology facilities in the country containing 6 state of the art climate & environmentally controlled laboratories situated within our 20K sq. ft building providing an extremely pleasurable working environment.
QCS is an ISO/IEC 17025 Accredited full service metrology lab established in 1984 that provides calibration services to the Aerospace, Automotive, Defense, Medical, Nuclear, and all other General, Manufacturing sectors. QCS calibrates Hard Gages (i.e. Gage Blocks, Cylindrical and Threaded - Plugs, Rings, & Pins, etc.), QCS also performs calibration and repair of Electro-Mechanical Gage Hand Tools (i.e. Micrometers, Calipers, Indicators, Torque, Force, Pressure, Height Gages, Mass, etc.), Electronic Test & Measurement Equipment (Oscilloscopes, Multi-meters, Frequency Counters, Signal Generators, Hypots,etc.).OCS offers on-site services for the calibration of CMM’s, Hand Tools, Surface Plates, Optical Comparators, Hardness Testers, Electronic Instrumentation, and more. In addition QCS provides 1st Article Dimensional Inspection Services utilizing our touch probe and Video CMM’s) QCS has one of the broadest scopes of Accreditation of any lab in the country while maintaining one of the finest reputations in the industry for nearly 40 years. QCS has one of the finest Metrology facilities in the country containing 6 state of the art climate & environmentally controlled laboratories situated within our 20K sq. ft building providing an extremely pleasurable working environment.
Job Summary
JOB TYPE
Full Time
SALARY
$51k-67k (estimate)
POST DATE
07/01/2024
EXPIRATION DATE
09/02/2024
WEBSITE
qualitycalibration.com
HEADQUARTERS
Milwaukee, WI
SIZE
25 - 50
Related Companies
Show more
Similar Jobs
Popular Articles
Top 10 Things to Avoid Putting on a Job Application
Read Article
How to Describe Your Education in a Resume
Read Article
How to Write a Memorable Cover Letter in 5 Ways
Read Article
4 Personal Finance Tips to Make During Job Transition
Read Article
4 Best Camera Setups for Interview
Read Article
Keeping a Job Search Journal: 9 Types of Journaling You Can Do
Read Article
