10 Jobs in Indian Head, MD
SORT BY
E
N
R
E
E
G
R
X
X
X
Energy Jobline IN is Hiring an ENGINEER/SCIENTIST Near Indian Head, MD
Job DescriptionSummaryYou will serve as an ENGINEER/SCIENTIST (Technologist) in the Systems Engineering Department (E) within the CAD/PAD Division (E2) of NAVSURFWARCEN IH DIV.
This position is part of the Warfare Centers Personnel Demonstration Project. The ND-5 pay band encompasses positions equivalent to GS-14 and GS-15.
This job is open to
VideosDuties
Professional Physics Series, 1310, IOR: Physics Series 1310 (opm.gov)
Experience refers to paid and unpaid experience, including volunteer work done through Service programs (e.g., professional, philanthropic, , spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
EducationApplicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:FOR 08XX: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
FOR 1310:
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants...
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/
Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.
A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be EvaluatedYou will be evaluated for this job based on how well you meet the qualifications above.
When The Application Process Is Complete, We Will Review Your Resume To Ensure You Meet The Hiring Eligibility And Qualification Requirements Listed In This Announcement. You Will Be Rated Based On The Information Provided In Your Resume And Responses To The Occupational Questionnaire, Along With Your Supporting Documentation To Determine Your Ability To Demonstrate The Following Competencies:
If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified.
Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.
All eligibility, qualifications, and requirements must be met by the closing date of this announcement.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
This position is part of the Warfare Centers Personnel Demonstration Project. The ND-5 pay band encompasses positions equivalent to GS-14 and GS-15.
This job is open to
- Career transition (CTAP, ICTAP, RPL)
- Federal employees - Competitive service
- Individuals with disabilities
- Land & base management
- Military spouses
- Special authorities
- Veterans
VideosDuties
- You will lead programs involving Research and Development for Aircraft Escape Systems, Stores Release System, Missiles, Aviation Life Support and Fire Suppression System in support of all customers assigned.
- You will be lead the design, development, qualification, and service release of Cartridge Actuated and Propellant Actuated Devices (CAD/PAD) and other energetic and non-energetic devices for various military systems.
- You will provide supervision and leadership to a team of engineers, technicians, analysts, and personnel involved with supporting and sustaining (CAD/PAD).
- You will organize and plan new and on-going work for technology transition efforts for (CAD/PAD).
- You will be responsible for preparing written plans and reports and making presentations to interested parties on program/project status, problems, milestones, scheduling, cost, etc.
- You will be required to successfully complete a pre-appointment physical examination.
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- born after 12-31-59 must be registered for Selective Service.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
Professional Physics Series, 1310, IOR: Physics Series 1310 (opm.gov)
Experience refers to paid and unpaid experience, including volunteer work done through Service programs (e.g., professional, philanthropic, , spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
EducationApplicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:FOR 08XX: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
FOR 1310:
- Successfully completed a bachelor's degree or higher in physics, or a related degree that included at least 24 semester hours in physics. Courses must have included a fundamental course in general physics and, in addition, course in any of two of the following: electricity and magnetism, heat, light, mechanics, modern physics, and sound.
- OR
- Have a combination of education and experience with courses equivalent to a major in physics totaling at least 24 semester hours, plus appropriate experience or additional education. Courses must have included a fundamental course in general physics and, in addition, course in any of two of the following: electricity and magnetism, heat, light, mechanics, modern physics, and sound.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants...
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/
Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.
A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.
- Benefits
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be EvaluatedYou will be evaluated for this job based on how well you meet the qualifications above.
When The Application Process Is Complete, We Will Review Your Resume To Ensure You Meet The Hiring Eligibility And Qualification Requirements Listed In This Announcement. You Will Be Rated Based On The Information Provided In Your Resume And Responses To The Occupational Questionnaire, Along With Your Supporting Documentation To Determine Your Ability To Demonstrate The Following Competencies:
- AEROSPACE ENGINEERING
- MECHANICAL ENGINEERING
- ORAL COMMUNICATION
- PHYSICS
- SYSTEMS ENGINEERING
- WRITTEN COMMUNICATION
If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified.
Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.
All eligibility, qualifications, and requirements must be met by the closing date of this announcement.
- Benefits
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
- Required Documents
Job Summary
JOB TYPE
Full Time
SALARY
$100k-120k (estimate)
POST DATE
07/06/2024
EXPIRATION DATE
08/02/2024
WEBSITE
energyjobline.com
HEADQUARTERS
London
SIZE
<25
Related Companies
Show more
The following is the career advancement route for ENGINEER/SCIENTIST positions, which can be used as a reference in future career path planning. As an ENGINEER/SCIENTIST, it can be promoted into senior positions as a Biomedical Engineer IV that are expected to handle more key tasks, people in this role will get a higher salary paid than an ordinary ENGINEER/SCIENTIST. You can explore the career advancement for an ENGINEER/SCIENTIST below and select your interested title to get hiring information.
Similar Jobs
Popular Articles
Top 10 Things to Avoid Putting on a Job Application
Read Article
How to Describe Your Education in a Resume
Read Article
How to Write a Memorable Cover Letter in 5 Ways
Read Article
4 Personal Finance Tips to Make During Job Transition
Read Article
4 Best Camera Setups for Interview
Read Article
Keeping a Job Search Journal: 9 Types of Journaling You Can Do
Read Article
